Sliding wear behaviour of PEEK‐PTFE blends
- 1 October 2003
- journal article
- Published by Wiley in Journal of Synthetic Lubrication
- Vol. 20 (3) , 227-240
Abstract
The role of PTFE in tailoring the tribological performance of PEEK is not clear from the literature, and conflicting evidence is reported about its ability to improve friction, wear, or both. Moreover, little has been reported on the optimum composition of such blends for the best possible combination of mechanical and tribological properties. Hence, in this work various blends of PEEK with PTFE have been injection moulded and characterised for their mechanical properties. Their friction and wear behaviour was evaluated using a pin‐on‐disc machine. It was observed that the inclusion of PTFE powder not only removed scuffing problems associated with the friction behaviour of PEEK, but also improved both friction and wear characteristics. A blend with 7.5 wt. % PTFE showed the best wear behaviour, while a blend with 30 wt.% PTFE exhibited the best friction performance. A concentration of 7.5 wt. % PTFE was thought to be the optimum amount for the best possible combination of mechanical and tribological properties.Keywords
This publication has 20 references indexed in Scilit:
- On sliding friction and wear of PEEK and its compositesWear, 1995
- The growth and bonding of transfer film and the role of CuS and PTFE in the tribological behavior of PEEKWear, 1995
- The failure of poly (ether ether ketone) in high speed contactsWear, 1993
- The investigation of the action of fillers by XPS studies of the transfer films of PEEK and its composites containing CuS and CuF2Wear, 1993
- Tribology of polyetheretherketoneWear, 1992
- Friction behaviour of polyetheretherketone under dry reciprocating movementWear, 1991
- Friction and wear behaviour of 18 polymers in contact with steel in environments of air and waterWear, 1991
- On the wear behaviour of short-fibre-reinforced peek compositesWear, 1987
- Speed effects on the dry and lubricated wear of polymersWear, 1986
- The friction and wear of poly(tetrafluoroethylene)-poly (etheretherketone) composites: An initial appraisal of the optimum compositionWear, 1986