Performance of Supercritical CO2 Power Cycle and Its Turbomachinery with the Printed Circuit Heat Exchanger with Straight and Zigzag Channels
Open Access
Abstract
Since printed circuit heat exchangers (PCHE) are the largest modules of a supercritical carbon dioxide Brayton cycle, they can considerably affect the whole system’s performance and layout. Straight-channel and zigzag-channel printed circuit heat exchangers have frequently been analyzed in the standalone mode and repeatedly proposed for . However, the impact of heat exchanger designs with straight and zigzag-channel configurations on the performance of the cycle and its components, i.e., the turbine and compressor, has not been studied. In this context, this study evaluates the effect of different heat exchanger designs with various values of effectiveness (), inlet Reynolds number (Re), and channel configuration (zigzag and straight channel) on the overall performance of the and its components. For the design and analysis of PCHEs, an in-house PCHE design and analysis code (PCHE-DAC) was developed in the MATLAB environment. The performance was evaluated utilizing an in-house cycle simulation and analysis code (CSAC) that employs the heat exchanger design code as a subroutine. The results suggest that pressure drop in PCHEs with straight-channel configuration is up to 3.0 times larger than in PCHEs with zigzag-channel configuration. It was found that a higher pressure drop in the PCHEs with straight channels can be attributed to substantially longer channel lengths required for these designs (up to 4.1 times than zigzag-channels) based on the poor heat transfer characteristics associated with these channel geometries. Thus, cycle layouts using PCHEs with a straight-channel configuration impart a much higher load (up to 1.13 times) on the recompression compressor, this in turn, results in a lower pressure ratio across the turbine. Therefore, the overall performance of the using PCHEs with straight-channel configurations is found to be substantially inferior to that of layouts using PCHEs with zigzag-channel configurations. Finally, optimization results suggest that heat exchanger’s design with inlet Reynolds number and heat exchanger effectiveness ranging from to and , respectively, are optimal for and present a good bargain between cycle efficiency and its layout size.
Keywords
Funding Information
- National Research Foundation of Korea (No.2020R1A2C1007068)
This publication has 38 references indexed in Scilit:
- Improving the efficiency of gas turbine-air bottoming combined cycle by heat exchangers and bypass control valvesPhysica Scripta, 2020
- On the Conceptual Design of Novel Supercritical CO2 Power Cycles for Waste Heat RecoveryEnergies, 2020
- Thermal Performance Analysis of a Direct-Heated Recompression Supercritical Carbon Dioxide Brayton Cycle Using Solar ConcentratorsEnergies, 2019
- Design optimization and performance analysis of a supercritical carbon dioxide recompression Brayton cycle based on the detailed models of the cycle componentsEnergy Conversion and Management, 2019
- Optimization of a recompression supercritical carbon dioxide cycle for an innovative central receiver solar power plantEnergy, 2016
- Review of supercritical CO2 power cycle technology and current status of research and developmentNuclear Engineering and Technology, 2015
- Mapping of the thermodynamic performance of the supercritical CO2 cycle and optimisation for a small modular reactor and a sodium-cooled fast reactorEnergy, 2015
- Performance comparison of different supercritical carbon dioxide Brayton cycles integrated with a solar power towerEnergy, 2015
- Thermodynamic Study of Advanced Supercritical Carbon Dioxide Power Cycles for Concentrating Solar Power SystemsJournal of Solar Energy Engineering, 2013
- The supercritical thermodynamic power cycleEnergy Conversion, 1968