A multi-fidelity model intercomparison for wake steering of a large turbine in a conventionally neutral atmospheric boundary layer
Open Access
- 11 May 2026
- journal article
- research article
- Published by Copernicus GmbH in Wind Energy Science
- Vol. 11 (5) , 1679-1703
Abstract
Wake steering is a promising control strategy for wind farm optimization, yet its effectiveness depends on the accuracy of underlying aerodynamic and structural models. In this study, we evaluate the predictive capabilities of models with varying fidelity for the IEA 22 MW reference turbine, considering both a single turbine and a two-turbine row with 5D spacing under conventionally neutral atmospheric boundary layer conditions. Results are benchmarked against large-eddy simulations (LESs). All models reproduced qualitative trends in power and, where applicable, loads as a function of yaw angle and downstream position, but there was a large spread in quantitative agreement. The dynamic wake meandering (DWM) model implemented in Dynamiks gave very good predictions for mean power, acceptable results for blade and yaw bending damage equivalent loads (DELs) but heavily underpredicted the tower bottom DELs compared to LESs. RANS results from EllipSys3D resolved asymmetric wake features but with reduced magnitude, leading to increasing errors for power prediction with increasing wake deflection. Steady-state engineering models (PyWake and Fuga) performed reasonably well for power prediction in the aligned cases but showed increasing errors under yaw misalignment. None of the engineering models reproduced secondary steering. These findings highlight the limitations of the tested engineering and mid-fidelity models, and emphasize the need for improved treatment of wake asymmetry, veer effects, and meandering physics to enhance reliability in practical optimization applications.Keywords
All Related Versions
Funding Information
- Horizon 2020 (101122256)
- Equinor (None)
This publication has 61 references indexed in Scilit:
- A time‐varying formulation of the curled wake model within the FAST.Farm frameworkWind Energy, 2022
- Multimodel validation of single wakes in neutral and stratified atmospheric conditionsWind Energy, 2020
- Thek-ε-fPmodel applied to double wind turbine wakes using different actuator disk force methodsWind Energy, 2014
- An improved k‐ ϵ model applied to a wind turbine wake in atmospheric turbulenceWind Energy, 2014
- Two improvements to the dynamic wake meandering model: including the effects of atmospheric shear on wake turbulence and incorporating turbulence build‐up in a row of wind turbinesWind Energy, 2013
- Testing an Improved Artificial Viscosity Advection Scheme to Minimise Wiggles in Large Eddy Simulation of Buoyant Jet in CrossflowFlow, Turbulence and Combustion, 2013
- A control algorithm for statistically stationary large-eddy simulations of thermally stratified boundary layersQuarterly Journal of the Royal Meteorological Society, 2013
- Verification and validation of an actuator disc modelWind Energy, 2013
- Application of a LES technique to characterize the wake deflection of a wind turbine in yawWind Energy, 2009
- Wake meandering: a pragmatic approachWind Energy, 2008