Flow Behavior and Microstructure of Hot‐Worked TiNbTaVW Refractory High‐Entropy Alloy
Open Access
- 7 August 2024
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (20)
Abstract
The high‐temperature deformation behavior of an equiatomic TiNbTaVW refractory high entropy alloy (RHEA) was studied at temperatures of 950, 1000, and 1050 °C and a strain rate of 10 −3 s −1 . The flow stress, high‐temperature strength, and softening mechanisms were analyzed and compared with the IN718 nickel‐based superalloy. The results indicate that the flow stress of both TiNbTaVW and IN718 is sensitive to deformation temperature, with high temperatures resulting in reduced flow stress. Globular grains and elongated grains were observed at 950 and 1000 °C for TiNbTaVW, signifying both dynamic recovery and dynamic globularization as the softening mechanisms. Globular grains were only observed at 1050 °C for TiNbTaVW, signifying dynamic globularization as the softening mechanism. The TiNbTaVW RHEA has a higher temperature strength of 910, 870, and 658 MPa compared to the IN718 alloy with 72, 87, and 61 MPa at 950–1000 °C/10 −3 s −1 . By demonstrating comparable or superior performance in specific aspects, RHEAs can be considered in the near future for potential applications traditionally dominated by nickel‐based superalloys.Keywords
This publication has 79 references indexed in Scilit:
- Hot working behaviour of low-cost Ti-3.4Fe bio-implant alloyThe International Journal of Advanced Manufacturing Technology, 2023
- Optimization of Microstructure and Mechanical Properties of Hipped Inconel 718 by Various Heat Treatment ProcessesMetallography, Microstructure, and Analysis, 2019
- Microstructural evolution during hot forming of Ti-6Al-4V alloy with complex initial microstructureThe International Journal of Advanced Manufacturing Technology, 2019
- Unique deformation behavior and microstructure evolution in high temperature processing of HfNbTaTiZr refractory high entropy alloyActa Materialia, 2019
- A critical review of high entropy alloys and related conceptsActa Materialia, 2017
- Hot Deformation Processing Map and Microstructural Evaluation of the Ni-Based Superalloy IN-738LCJournal of Materials Engineering and Performance, 2016
- Temperature Effects on Deformation and Serration Behavior of High-Entropy Alloys (HEAs)JOM, 2014
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004
- Serrated plastic flowBulletin of Materials Science, 1984
- Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformationActa Metallurgica, 1969