Intumescent flame retardant TPO composites: Flame retardant properties and morphology of the charred layer
Authors:
- 25 October 2011
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 124 (3) , 2071-2079
Abstract
Intumescent flame retardant thermoplastic polyolefin (TPO) composites were prepared to study the relationships between their structure of charred layer (including of the multicellular intumescent layer and the charry layer) and flame retardant properties. They were characterized using the LOI and UL‐94 test, which indicated that the best fire retardant behavior (V‐0 rating and LOI reach to 28.1%) was obtained at the formulation of TPO/ammonium dihydrogen phosphate/starch (100/60/20). Thermal gravimetric analysis demonstrated that the presence of ammonium dihydrogen phosphate/starch promoted the esterification and carbonization process in lower temperature range while enhancing the thermal stability of intumescent flame retardant TPO in high‐temperature range. Scanning electron microscope and optical microscope were shown that, with combustion time prolonged, the intumescent layers obtained greater number of cells, and the charry layer became more compact while the size of the carbon granules became smaller on the surface. Introduction of starch had an obvious effect on the structure of the intumescent and charry layers. The charry layer of the composites with the content of 20 phr starch was more compact and uniform than that of the composites with 50 phr. The weight ratio of ammonium dihydrogen phosphate to starch in the intumescent flame retardant was fixed as 3 : 1 which cooperated with each other well to promote a compact charry layer and to obtain the better flame retardancy performance. Therefore, the better the charred layers produced, and the better flame retardant properties they obtained. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012Keywords
This publication has 26 references indexed in Scilit:
- Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular FoamsMacromolecular Materials and Engineering, 2008
- Halogen Free Flame Retardant Agents for Polypropylene in Wire Coating ProcessMacromolecular Symposia, 2007
- Thermal decomposition study of intumescent additives: Pentaerythritol phosphate and its blend with melamine phosphateThermochimica Acta, 2005
- Performance of an intumescent‐flame‐retardant master batch synthesized by twin‐screw reactive extrusion: effect of the polypropylene carrier resinPolymer International, 2004
- Characterization of a polyamide-6-based intumescent additive for thermoplastic formulationsPolymer, 2000
- Toughening of polypropylene by different elastomeric systemsPolymer, 1998
- Influence of covalently bound phosphorus-containing groups on the flammability of poly(vinyl alcohol), poly(ethylene-co-vinyl alcohol) and low-density polyethylenePolymer, 1993
- Preparation and properties of brominated poly(arylcarboxylate)s via interfacial polycondensationJournal of Polymer Science Part A: Polymer Chemistry, 1990
- Synthesis and properties of polyamides derived from systematically halogenated terephthalic acids with fluorine, chlorine, or bromine atomsJournal of Polymer Science Part A: Polymer Chemistry, 1988
- Synergistic action of Sb2O3 with bromine‐containing flame retardant in polyolefins: 3—The relationship between certain combustion variablesFire and Materials, 1982