Preparation of 4-vinylpyridine (4VP) resin and its adsorption performance for heavy metal ions
Authors:
Open Access
- 16 January 2017
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (8) , 4226-4236
Abstract
The study focused on the preparation of a chelating resin with pyridine ring as the functional group. The 4VP monomer was directly grafted on the surface of CMPS resin via SI-ATRP, and the performance of adsorption of resin for Cr(VI), Pb(II), Cr(III), Zn(II), and Cd(II) was determined. With the extension of ATRP time and increase of 4VP consumption, the 4VP grafting rate was linearly increased, indicating an increase in the density of the pyridine ring on the resin surface. Adsorption experiments indicated that the adsorption capacity of the resin for the metal ions considerably improved when compared with that of those reported in literature, whereas the desorption rate and reusability were equivalent to those of the conventional resins. When the pH value was greater than 5.0, Pb(II), Cr(III), Zn(II), and Cd(II) ions could be adsorbed; however, when the pH value was less than 3.0, Cr(VI) could be selectively adsorbed. These results are indicative of a potential application of the resin in the treatment of heavy metal wastewater. Therefore, adoption of one-step SI-ATRP is one of the effective methods for preparing a chelating resin with high capacity via the selection of an appropriate functional monomer.Keywords
This publication has 28 references indexed in Scilit:
- Effect of large pore size of multifunctional mesoporous microsphere on removal of heavy metal ionsJournal of Hazardous Materials, 2013
- Effective removal of heavy metal ions Cd2+, Zn2+, Pb2+, Cu2+ from aqueous solution by polymer-modified magnetic nanoparticlesJournal of Hazardous Materials, 2012
- Preparation of hydrophilic polymer-grafted polystyrene beads for hydrophilic interaction chromatography via surface-initiated atom transfer radical polymerizationJournal of Separation Science, 2011
- Surface modification of glass beads with glutaraldehyde: Characterization and their adsorption property for metal ionsJournal of Hazardous Materials, 2009
- Selective removal of Cr(VI) ions from aqueous solutions including Cr(VI), Cu(II) and Cd(II) ions by 4-vinly pyridine/2-hydroxyethylmethacrylate monomer mixture grafted poly(ethylene terephthalate) fiberJournal of Hazardous Materials, 2009
- Poly(vinyl pyridine-poly ethylene glycol methacrylate-ethylene glycol dimethacrylate) beads for heavy metal removalJournal of Hazardous Materials, 2008
- Interactions of metal ions with chitosan-based sorbents: a reviewSeparation and Purification Technology, 2004
- Microscopic analysis of porosity of 2-vinylpyridine copolymer networks: 1. Influence of diluentMaterials Letters, 2004
- Preparation and characterization of highly polar polymeric sorbents from styrene–divinylbenzene and vinylpyridine–divinylbenzene for the solid‐phase extraction of polar organic pollutantsJournal of Polymer Science Part A: Polymer Chemistry, 2003
- Controlled/“Living” Radical Polymerization. Kinetics of the Homogeneous Atom Transfer Radical Polymerization of StyreneJournal of the American Chemical Society, 1997