Abstract
In evaluating ceramic magnet materials as to suitability for permanent magnet motor use, it has been found that the normally accepted criterions, energy product, is of very little value. A new figure of merit is proposed, which is BrHx. Br is the residual induction of the material, and Hx is defined as the H coordinate of a point on the intrinsic demagnetization curve, whose B coordinate is 0.8Br. For an imaginary motor with zero air gap, equations are developed to show an inverse proportionality between BrHx and the total volume of magnet material required to meet a given motor performance curve. For real motors, which contain air gaps, the figure of merit becomes; Br[Hx−0.8Br/(Pc +1)], where Pc is the permeance coefficient at which the magnet is operating. Since Pc does not vary widely in typical motors, and since this second figure of merit is not extremely sensitive to the value of Pc in typical ceramic magnet materials, an average value can be assigned to each material for comparison purposes. This second quantity is designated BrHa. A tabulation of both figures of merit, and other data, is given for the materials designated by the Magnetic Materials Producers Association as Ceramic 2–6, inclusive.