Sensorless Finite-Control Set Model Predictive Control for IPMSM Drives
- 8 June 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 63 (9) , 5921-5931
Abstract
This paper investigates the feasibility of a sensorless field-oriented control combined with a finite-control set model predictive current control (FCS-MPC) for an interior permanent-magnet synchronous motor. The use of an FCS-MPC makes the implementation of most of the existing sensorless techniques difficult due to the lack of a modulator. The proposed sensorless algorithm exploits the saliency of the motor and the intrinsic higher current ripple of the FCS-MPC to extract position and speed information using a model-based approach. This method does not require the injection of additional voltage vectors or the periodic interruption of the control algorithm and consequently it has no impact on the performance of the current control. The proposed algorithm has been tested in simulation and validated on an experimental setup, showing promising results.Keywords
This publication has 30 references indexed in Scilit:
- PSO-Based Self-Commissioning of Electrical Motor DrivesIEEE Transactions on Industrial Electronics, 2015
- Sensorless Control of PMSM for the Whole Speed Range Using Two-Degree-of-Freedom Current Control and HF Test Current Injection for Low-Speed RangeIEEE Transactions on Power Electronics, 2014
- Encoderless Servo Drive With Adequately Designed IPMSM for Pulse-Voltage-Injection-Based Position DetectionIEEE Transactions on Industry Applications, 2012
- Dead-time compensation in model predictive instantaneous-current control2012
- Self-commissioning of direct drive systems2012
- Carrier-Signal Selection for Sensorless Control of PM Synchronous Machines at Zero and Very Low SpeedsIEEE Transactions on Industry Applications, 2009
- Acquisition of Position Error and Magnet Polarity for Sensorless Control of PM Synchronous MachinesIEEE Transactions on Industry Applications, 2008
- Sensorless Rotor Position Estimation in Synchronous Reluctance Motors Exploiting a Flux Deviation ApproachIEEE Transactions on Industry Applications, 2007
- Industry application of zero-speed sensorless control techniques for PM synchronous motorsIEEE Transactions on Industry Applications, 2001
- Initial rotor position estimation method of sensorless PM synchronous motor with no sensitivity to armature resistanceIEEE Transactions on Industrial Electronics, 1998