Fabrication and Mechanical Performance of Graphene Nanoplatelet/Glass Fiber Reinforced Polymer Hybrid Composites
Open Access
- 16 November 2021
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 8
Abstract
Glass fiber reinforced polymer (GFRP) composites are promising alternatives for the traditional carbon steel pipes used in the oil and gas industry due to their corrosion and chemical resistance. However, the out-of-plane mechanical properties of GFRPs still need further improvement to achieve this goal. Hence, in this work, two methods combining either vacuum mixing or spray coating with vacuum-assisted resin infusion were studied to fabricate graphene nanoplatelet (GNP)/GFRP hybrid composites. The former method resulted in a severe filtering effect, where the GNPs were not evenly distributed throughout the final composite, whereas the latter process resulted in a uniform GNP distribution on the glass fabrics. The addition of GNPs showed no modest contribution to the tensile performance of the GFRP composites due to the relatively high volume and in-plane alignment of the glass fibers. However, the GNPs did improve the flexural properties of GFRP with an optimal loading of 0.15 wt% GNPs, resulting in flexural strength and modulus increases of 6.8 and 1.6%, respectively. This work indicates how GNPs can be advantageous for out-of-plane mechanical reinforcement in fiber-reinforced composites.Keywords
This publication has 46 references indexed in Scilit:
- The role of functional groups on graphene oxide in epoxy nanocompositesPolymer, 2013
- The mechanics of graphene nanocomposites: A reviewComposites Science and Technology, 2012
- Processing of nanographene platelets (NGPs) and NGP nanocomposites: a reviewJournal of Materials Science, 2008
- Toughening mechanisms of nanoparticle-modified epoxy polymersPolymer, 2007
- Raman Spectrum of Graphene and Graphene LayersPhysical Review Letters, 2006
- Offshore composites: Transition barriers to an enabling technologyComposites Science and Technology, 2005
- Electric Field Effect in Atomically Thin Carbon FilmsScience, 2004
- Interpretation of Infrared Spectra, A Practical Approach2000
- High temperature failure envelopes for thermosetting composite pipes in waterPlastics, Rubber and Composites: Macromolecular Engineering, 2000
- An overview of the technology of fibre-reinforced plastics for design purposesMaterials & Design (1980-2015), 1998