Advances in Characterization of CMP Consumables
Authors:
- Mansour MoinpourMMMansour Moinpour
- Alex TregubATAlex Tregub
- Andrea OehlerAOAndrea Oehler
- Ken CadienKCKen Cadien
- 1 October 2002
- journal article
- Published by Springer Nature in MRS Bulletin
- Vol. 27 (10) , 766-771
Abstract
Chemical–mechanical polishing, or planarization (CMP), has emerged as an increasingly important technology for integrated-circuit manufacturing. Consumables used during CMP interact in a complex manner with the polishing tool, the process conditions, and the wafer being polished. In this article, several advanced analytical methods are used to analyze the properties of slurries and pads under conditions similar to those found during CMP processing. Some of the key findings are that under these process conditions, pads can be stabilized with a heat treatment prior to installation on the polisher; pads absorb slurries at different rates, and slurries also react with the pads; and the mechanical properties of the pads are dependent on the orientation of the grooves on the pad. Dynamic rheometry was used to detect de-agglomeration in sheared slurries.Keywords
This publication has 12 references indexed in Scilit:
- Characterization of mechanical planarization processes2002
- Full copper wiring in a sub-0.25 μm CMOS ULSI technology2002
- Material removal mechanism in chemical mechanical polishing: theory and modelingIEEE Transactions on Semiconductor Manufacturing, 2001
- Pad porosity, compressibility and slurry delivery effects in chemical-mechanical planarization: modeling and experimentsThin Solid Films, 2000
- Variation of polish pad shape during pad dressingMaterials Science and Engineering: B, 1999
- Modeling of chemical-mechanical polishing with soft padsApplied Physics A, 1998
- The exothermic reaction and temperature measurement for tungsten CMP technology and its application on endpoint detectionMaterials Chemistry and Physics, 1998
- The effect of the polishing pad treatments on the chemical-mechanical polishing of SiO2 filmsThin Solid Films, 1995
- Chemical‐Mechanical Polishing for Fabricating Patterned W Metal Features as Chip InterconnectsJournal of the Electrochemical Society, 1991
- Moisture Absorption and Desorption of Composite MaterialsJournal of Composite Materials, 1976