Characterization of Desulfurized Crumb Rubber/Styrene–Butadiene–Styrene Composite Modified Asphalt Based on Rheological Properties
Open Access
Abstract
With the growing interest in bituminous construction materials, desulfurized crumb rubber (CR)/styrene–butadiene–styrene (SBS) modified asphalts have been investigated by many researchers as low-cost environmental-friendly road construction materials. This study aimed to investigate the rheological properties of desulfurized CR/SBS composite modified asphalt within various temperature ranges. Bending beam rheometer (BBR), linear amplitude sweep (LAS), and multiple stress creep recovery (MSCR) tests were performed on conventional CR/SBS composite modified asphalt and five types of desulfurized CR/SBS modified asphalts. Meanwhile, Burgers’ model and the Kelvin–Voigt model were used to derive nonlinear viscoelastic parameters and analyze the viscoelastic mechanical behavior of the asphalts. The experimental results indicate that both the desulfurized CR/SBS composite modifier and force chemical reactor technique can enhance the crosslinking of CR and SBS copolymer, resulting in an improved high-, intermediate-, and low-temperature performance of desulfurized CR/SBS composite modified asphalt. Burgers’ model was found to be apposite in simulating the creep stages obtained from MSCR tests for CR/SBS composite modified asphalts. The superior high-temperature performance of desulfurized CR/SBS modified asphalt prepared with 4% SBS, 20% desulfurized rubber, and a force chemical reactor time of 45 min contributes to the good high-temperature elastic properties of the asphalt. Therefore, this combination is recommended as an optimal preparation process. In summary, the desulfurization of crumb rubber and using the force chemical reactor technique are beneficial to composite asphalt performance and can provide a new way of utilizing waste tire rubber.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (3221002122D)
- Postgraduate Research & Practice Innovation Program of Jiangsu Province (SJCX20_0047)
This publication has 27 references indexed in Scilit:
- Waste materials in highway applications: An overview on generation and utilization implications on sustainabilityJournal of Cleaner Production, 2021
- Rheological properties of asphalt binders modified with recycled materials: A comparison with Styrene-Butadiene-Styrene (SBS)Construction and Building Materials, 2020
- Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA)Construction and Building Materials, 2017
- Rheological behaviors and microstructure of SBS/CR composite modified hard asphaltConstruction and Building Materials, 2016
- Rheological evaluation of polymer modified asphalt bindersJournal of Wuhan University of Technology-Mater. Sci. Ed., 2015
- Microstructure and rheological properties of aged and unaged polymer-modified asphalt bindersRoad Materials and Pavement Design, 2015
- The research for structural characteristics and modification mechanism of crumb rubber compound modified asphaltsConstruction and Building Materials, 2015
- Recycled Tyre Rubber Modified Bitumens for road asphalt mixtures: A literature reviewConstruction and Building Materials, 2013
- Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphaltConstruction and Building Materials, 2011
- Rheological evaluation of polymer-modified asphalt bindersMaterials Research, 2008