Structural Health Monitoring of Timber Using Electromechanical Impedance (EMI) Technique
Open Access
- 1 January 2020
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2020 (1)
Abstract
Nowadays, the electromechanical impedance method has been widely used in the field of structural healthy monitoring, especially for the concrete and steel materials. However, the electromechanical impedance studies on damage detection for timber are limited due to the anisotropic and ununiform biomaterial properties. As a low‐cost and environment‐friendly building material, timber has been widely used in the construction. Thus, it is beneficial to develop electromechanical impedance technique for structural healthy monitoring of timber so as to ensure the stability and safety of the entire timber structures. In this paper, two damage factors, i.e., the damage location factor and the damage size factor of timber specimens are investigated by using the electromechanical impedance method. The method is implemented by using a patch of Lead Zirconate Titanate transducer both as an actuator to generate stress waves and a sensor to detect stress waves after propagating across the timber specimens. Then, the damage index‐root mean square deviation is employed to evaluate the damage severity of the timber specimens. The results indicate that the damage index changes consistently with the change of damage location and size factors, and the proposed method using electromechanical impedance technique can efficiently estimate the damage and its severity.Keywords
Funding Information
- Wuhan University of Science and Technology (Y201904)
- National Natural Science Foundation of China (51108358, 51574184)
This publication has 38 references indexed in Scilit:
- Guidelines for On-Site Assessment of Historic Timber StructuresInternational Journal of Architectural Heritage, 2014
- Analysis of bimorph piezoelectric beam energy harvesters using Timoshenko and Euler–Bernoulli beam theoryJournal of Intelligent Material Systems and Structures, 2012
- Monitoring of the strength gain of concrete using embedded PZT impedance transducerConstruction and Building Materials, 2011
- Impedance-based wireless debonding condition monitoring of CFRP laminated concrete structuresNDT & E International, 2011
- Guided wave propagation and spectral element method for debonding damage assessment in RC structuresJournal of Sound and Vibration, 2009
- Application of electro-mechanical impedance sensing technique for online monitoring of strength development in concrete using smart PZT patchesConstruction and Building Materials, 2009
- Fast neutron radiography and tomography of woodInsight - Non-Destructive Testing and Condition Monitoring, 2008
- Application of modal-based damage-detection method to locate and evaluate damage in timber beamsJournal of Wood Science, 2007
- Health monitoring of steel structures using impedance of thickness modes at PZT patchesSmart Structures and Systems, 2005
- An Impedance Method for Dynamic Analysis of Active Material SystemsJournal of Vibration and Acoustics, 1994