Relation between leaching characteristics of heavy metals and physical properties of fly ashes from typical municipal solid waste incinerators
- 27 October 2016
- journal article
- research article
- Published by Taylor & Francis in Environmental Technology
- Vol. 38 (17) , 2105-2118
Abstract
Due to the alkalinity and high concentration of potentially hazardous heavy metals, fly ash from a municipal solid waste (MSW) incinerator is classified as hazardous waste, which should be of particular concern. Physical and chemical characterizations of the contrasted fly ashes were investigated to explore the relation between leaching characteristics of heavy metals and physical properties of fly ashes. The results showed that CaClOH, NaCl, Ca(OH)2, KCl and SiO2 were primary mineral compositions in the MSWI fly ashes, and the particle size distribution of fly ash ranged between 10 μm and 300 μm. The smaller the particle size distribution of fly ash, the larger the BET-specific surface area, which was beneficial to the leaching of heavy metals. As a result of various pores, it easily accumulated heavy metals as well. The leaching tests exhibited a high leachability of heavy metals and the leaching concentration of Pb in almost all of the fly ash samples went far beyond the Standard for Pollution Control on the Landfill Site of Municipal Solid Waste. Thereupon, it is necessary to establish proper disposal systems and management strategies for environmental protection based on the characteristics of MSW incineration (MSWI) fly ash in China.Keywords
Funding Information
- National Key Basic Research Program (2014CB238904)
- National Natural Science Foundation of China (51376074)
This publication has 27 references indexed in Scilit:
- A baseline study characterizing the municipal solid waste in the State of KuwaitWaste Management, 2014
- Physical and Chemical Characterization of Fly Ashes from Swiss Waste Incineration Plants and Determination of the Ash Fraction in the Nanometer RangeEnvironmental Science & Technology, 2014
- Physical and chemical characterization of ashes from a municipal solid waste incinerator in ChinaWaste Management & Research: The Journal for a Sustainable Circular Economy, 2013
- Belgian MSWI fly ashes and APC residues: A characterisation studyWaste Management, 2012
- Characterization of heavy metals in fly ash from municipal solid waste incinerators in ShanghaiProcess Safety and Environmental Protection, 2010
- Characterization of fly ash from a hazardous waste incinerator in Medellin, ColombiaJournal of Hazardous Materials, 2009
- Characterization of air pollution control residues produced in a municipal solid waste incinerator in PortugalJournal of Hazardous Materials, 2007
- Case studies––Problem solving in fluidized bed waste fuel incinerationEnergy Conversion and Management, 2005
- The sintering temperature of ash, agglomeration, and defluidisation in a bench scale PFBCFuel, 2005
- Characterization of solid residues from municipal solid waste incineratorFuel, 2004