The seismic responses of RC frames infilled with full and partial masonry walls under cyclic lateral load
Authors:
- MaidiawatiMAMaidiawati
- J TanjungJTJ Tanjung
Open Access
- 1 April 2021
- conference paper
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 708 (1)
Abstract
This paper presents the seismic responses of full and partial brick masonry infilled frames under lateral load. Four test specimens of ¼ scale-down single-story single-bay, including one RC bare frame, one RC frame with a full brick masonry wall, and two RC frames with partial brick masonry walls were tested under quasi-static cyclic loading. During the tests, initial crack, cracks propagation, and failure processes of specimens were monitored. Lateral forces and displacements in-plane direction at several points on specimens were recorded. Consequently, it was found the differences of seismic responses between a bare frame, fully masonry infilled frame, and partially masonry infilled frames. Installing full or partial masonry infills in the RC frames structure can change the failure mechanism, increase the lateral strength and stiffness, but decrease the ductility performance of the whole structure.Keywords
This publication has 3 references indexed in Scilit:
- SEISMIC ANALYSIS OF DAMAGED BUILDINGS BASED ON POST-EARTHQUAKE INVESTIGATION OF THE 2018 PALU EARTHQUAKEInternational Journal of GEOMATE, 2020
- R/C frame–infill interaction model and its application to Indonesian buildingsEarthquake Engineering & Structural Dynamics, 2016
- Cyclic response of masonry infilled RC frames: Experimental results and simplified modelingSoil Dynamics and Earthquake Engineering, 2014