Thermal Modeling of Crevice Corrosion and Its Interaction with Fretting in Confined Geometries
Author:
- 1 January 1992
- book chapter
- Published by ASTM International
- p. 28-43
Abstract
Local nucleate boiling in the crevice region between non-conforming contacting bodies causes an increase in the chemical concentration of the solution flowing in this region. This in turn may result in accelerated crevice corrosion damage. This paper is concerned with the development of a computer model for accurate prediction of the temperature field and the occurrence of nucleate boiling in the crevice region. The model recognizes the closed-loop interaction between the boiling process and the temperature field, through the changes in the conditions of heat transfer at water-cooled surfaces. It also accounts for the volumetric effect of the thermal contact resistance (TCR) and allows evaluating the thermal barrier effect caused by the increase in the TCR due to fretting corrosion. Analysis of the results indicated the significance of modeling the nonlinear behavior of the system for accurate predictions. The results also indicated that the increase in the TCR with fretting corrosion can cause the crevice corrosion process to be a self-limiting one.Keywords
This publication has 11 references indexed in Scilit:
- A thermally controlled fretting wear tribometer — a step towards standardization of test equipment and methodsWear, 1990
- Crevice Boiling in Steam GeneratorsJournal of Heat Transfer, 1987
- Boiling Heat Transfer in a Narrow Eccentric Annulus: Part III—A Model of Dry Patch Extent and Temperature DistributionJournal of Heat Transfer, 1986
- Effect of mode of motion and process parameters on the prediction of temperature rise in fretting wearWear, 1985
- Thermal Contact Correlations1982
- Heat Transfer between Metallic Surfaces in Contact : 1st report, The Conditions of Both Metals in Contact Being the SameBulletin of JSME, 1968
- CORRELATION OF THERMAL CONTACT CONDUCTANCE EXPERIMENTAL RESULTS1967
- Paper 6: Boiling in Sub-Cooled Water during Flow up Heated Tubes or AnnuliProceedings of the Institution of Mechanical Engineers, Conference Proceedings, 1965
- The Determination of Forced-Convection Surface-Boiling Heat TransferJournal of Heat Transfer, 1964
- Corrosion du zircaloy dans divers milieux alcalins a haute temperatureJournal of Nuclear Materials, 1962