Abstract
The process that segments an image acquired from an onboard optoelectronic surveillance system has been considered in this study. The task addressed relates to the fact that established segmentation methods based on ant algorithms do not take into account the influence of pixel local neighborhood topology on the set of permissible transitions for agents (ants). This leads to discontinuities in the contour of small objects of interest and to an increase in segmentation errors of the first and second kind. This work has improved a method for segmenting an optoelectronic image from an onboard optoelectronic surveillance system based on the maxmin ant algorithm, according to which, in contrast to established ones: – when constructing the graph of permissible transitions, a pixel's local neighborhood topology (von Neumann topology and Moore topology) is taken into account; – the construction of agent (ants) paths and the update of the pheromone are carried out taking into account the specified topology; – the pheromone is added to the edges that belong to the best paths of agents (ants). An experimental study has been conducted on the segmentation of optoelectronic images using the method based on the maxmin ant algorithm with different topologies of the local neighborhood of the pixel. It was found that when segmenting optoelectronic images using the Moore topology, the object of interest (Lancet-type unmanned aerial vehicle) was selected in all five runs of the method. When segmenting optoelectronic images using the von Neumann topology, the object of interest (Lancet-type unmanned aerial vehicle) was selected in only two out of five runs of the method. For the segmented image, the segmentation error of the second kind was reduced from (44.36 ± 36.67) % (method using the von Neumann topology) to 0% (method using the Moore topology). Compared with the Otsu segmentation method, the segmentation errors of the first and second kinds were reduced by 1.51% (method using the von Neumann topology) and 4.92% (method using the Moore topology). Of practical importance is the fact that the improved method makes it possible to reduce segmentation errors of objects of interest without using standards and prior training. The scope of application includes airborne optoelectronic surveillance and air situation monitoring systems