Characterization Study of an Oxide Film Layer Produced under CO2/Steam Atmospheres on Two Different Maraging Steel Grades
Authors:
- Mauro Andres Cerra FlorezMFMauro Andres Cerra Florez
- Gemma Fargas RibasGRGemma Fargas Ribas
- Joan Josep Roa RoviraJoan Josep Roa Rovira
- Enrique Vilarrasa-GarciaEnrique Vilarrasa-Garcia
- Enrique Rodríguez-CastellonEnrique Rodríguez-Castellon
- Ana Beatriz Ferreira SousaASAna Beatriz Ferreira Sousa
- Jorge Luiz CardosoJCJorge Luiz Cardoso
- Marcelo José Gomes da SilvaMSMarcelo José Gomes da Silva
Open Access
Abstract
Currently, surface treatments lead to inducing a superficial layer of several nanometers up to micrometer, which in some cases can be protective. In this experimental work, an oxide layer was generated under different atmospheres (CO2 and steam atmospheres) during the thermal aging treatment of two different maraging grades, 300 and 350. Afterwards, this layer was microstructural and mechanically characterized by advanced characterization techniques at the micro- and submicron length scale to highlight some information related to the generated oxide layer. The results showed that the oxide layer (in both grades) was made up of several compounds like: TiO2, MoO3, hematite (α-Fe2O3), and CoFe2O4, this being the majority compound distributed homogeneously throughout the layer. Furthermore, a nickel-rich austenitic phase at the interphase was mainly made up cobalt ions (Co2+), instead of iron ions (Fe2+), within the spinel lattice.Keywords
This publication has 65 references indexed in Scilit:
- XRD-based quantitative analysis of clay minerals using reference intensity ratios, mineral intensity factors, Rietveld, and full pattern summation methods: A critical reviewSolid Earth Sciences, 2018
- Hydrofluoric acid etching of dental zirconia. Part 1: etching mechanism and surface characterizationJournal of the European Ceramic Society, 2016
- Structure and corrosion resistance of oxides grown on maraging steel in steam at elevated temperaturesApplied Surface Science, 1997
- Comprehensive study of parameters for characterising three-dimensional surface topographyWear, 1994
- Comprehensive study of parameters for characterising three- dimensional surface topographyWear, 1994
- The kinetics of oxide film growth on Maraging steel as described by space‐charge effectsSurface and Interface Analysis, 1990
- The mechanism of oxidation of Fe-Ni-Co alloys; The role of Ti and MoApplications of Surface Science, 1983
- The oxidation mechanism of Fe-Ni-Co alloysOxidation of Metals, 1981
- A mechanism of oxidation of ferrous aloys by super-heated steamScripta Metallurgica, 1981
- Quantitative interpretation of X-ray diffraction patterns of mixtures. I. Matrix-flushing method for quantitative multicomponent analysisJournal of Applied Crystallography, 1974