Behaviour of hollow pultruded GFRP square beams with different shear span-to-depth ratios
- 28 July 2016
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 50 (21) , 2925-2940
Abstract
It is important to determine accurately the elastic properties of fibre-reinforced polymer composites material, considering that their member design is often governed by deflection rather than strength. In this study, the elastic properties of the pultruded glass fibre-reinforced polymer square sections were evaluated firstly using full-scale with different shear span to depth (a/d) ratios and tested under static four-point bending. Back calculation and simultaneous methods were then employed to evaluate the flexural modulus and shear stiffness and were compared with the results of the coupon tests. Secondly, the full-scale beams were tested up to failure to determine their capacity and failure mechanisms. Finally, prediction equations describing the behaviour of the pultruded glass fibre-reinforced polymer square beams were proposed and compared with the experimental results. The results indicate that the back calculation method gives more reliable values of elastic properties of glass fibre-reinforced polymer profiles. In addition, the behaviour of the beams is strongly affected by the a/d ratios. The shear was found to have a significant contribution on the behaviour of beams with lower a/d ratios while the flexural stress played a major part for higher a/d ratios. The proposed equation, which accounts for the combined effect of the shear and flexural stresses, reasonably predicted the failure load of pultruded glass fibre-reinforced polymer square beams.Keywords
This publication has 23 references indexed in Scilit:
- Testing and characterization of thick hybrid fibre composites laminatesInternational Journal of Mechanical Sciences, 2012
- Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bendingMaterials & Design (1980-2015), 2012
- Flexural stiffness characterization of fiber reinforced plastic (FRP) pultruded beamsComposite Structures, 2007
- Shear failure strength of web–flange junctions in pultruded GRP WF profilesConstruction and Building Materials, 2006
- Structural performance of a FRP bridge deckConstruction and Building Materials, 2004
- Section Properties and Buckling Behavior of Pultruded FRP ProfilesJournal of Reinforced Plastics and Composites, 2003
- Flexural behavior of sandwich beams fabricated by vacuum-assisted resin transfer moldingComposite Structures, 2003
- Analysis and design of pultruded FRP shapes under bendingComposites Part B: Engineering, 1996
- Flexural and Shear Moduli of Full-Section Fiber Reinforced Plastic (FRP) Pultruded BeamsJournal of Testing and Evaluation, 1989
- Shear coefficients for thin-walled composite beamsComposite Structures, 1987