Abstract
Summary form only given. Thanks to its nonlinear-, electro- and acousto-optical and piezo-response properties [1], lithium niobate (LiNbOs, LN) is widely used for many photonic applications. The high refractive index contrast offered by recently available thin film lithium-niobate-on-insulator (LNOI) platforms, provides new possibilities for miniaturizing LN-based integrated optics structures such as submicron waveguides [2] and resonators [3]. Inherent difficulties in patterning LN have led many researchers to pattern other optical layers contiguous to the LNOI instead [3], which results in a looser confinement of light in the LN layer, and hence a less efficient exploitation of its nonlinear and electro-optical properties. The latter features motivate ongoing efforts aiming at the development of a suitable technology for low-loss and high confinement waveguide ridges in LNOI [2, 4], which however still needs to be combined with periodic structures such as photonic crystals [5], grating couplers and Bragg reflectors in order to ultimately provide a fully functional integrated optics toolbox for ultra-compact LN photonics chips for efficient and ultrafast signal processing, modulation and frequency conversion.Here, we present results on grating couplers and Bragg reflectors designed and fabricated on LNOI ridge waveguides operating at telecom wavelengths around 1550 nm, in combination with integrated optical structures such as tapers and submicron waveguides enabling a fully-fledged LN photonic platform. Commercially available 300 nm-thick V-cut LNOI on Si wafers (with intrinsic LNOI slab losses of 3 dB/cm) were used to realize the integrated optical structures. Fig. 1(a) schematically shows the grating coupler structures fabricated by electronbeam lithography and reactive ion etching, similar to what reported in [4]. Input/output grating couplers (Fig. 1(a)) were combined with linear tapers to couple optical fiber light into/from photonic wire waveguides of various lengths L, at an angle of 10°. We implemented and evaluated the performance of two different designs (with etch depth of 200 nm) and different waveguide lengths of L = 0.5, 1 and 2 mm. Fig. 1(b) illustrates the transmission spectra of a grating coupler with period of Λ = 1.24 μm and duty cycle of 51%, where a total coupling loss of 9.95 dB (including coupling losses and any losses in the tapered region) was extracted from the experimental data. Furthermore, propagation losses of 76.2 and 15.1 dB/cm could be inferred for 660 nmand 2.2 μm-wide LNOI waveguides, respectively, from the analysis of measurements at different waveguide lengths L.