Wettability and Interfacial Reaction between Molten lron and Zirconia Substrates
Authors:
- 1 December 1993
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 76 (12) , 3000-3008
Abstract
The surface tension of, and the contact angle formed by, molten iron on three types of commercial zirconia substrates containing 8 mol% Y2O3, 9 mol% MgO, or 11 mol% CaO were measured over a wide range of oxygen concentration in the molten iron by the sessile drop method. The solidified metal–substrate interface was examined in an SEM equipped with an EPMA. The surface tension of molten iron decreased with increasing oxygen concentration. The contact angle of molten iron increased rapidly with increasing oxygen concentration and reached a local maximum value at an oxgyen concentration of ∼100 ppm, and then decreased with increasing oxygen concentration. At lower oxygen concentration, dissociation of ZrO2 was observed. For the ZrO2–9 mol% MgO substrate, segregation of MgO to the interface was observed. For the ZrO2–11 mol% CaO substrate, segregation of CaO and the precipitation of small ZrO2 particles in the segregation layer of CaO were observed at the interface. Conversely, at higher oxygen concentration, penetration of molten iron into the grain boundaries was observed in all types of zirconia substrates.Keywords
This publication has 22 references indexed in Scilit:
- Diffusion Bonds between a Stainless Steel and ZirconiaJournal of the American Ceramic Society, 1993
- Diffusion bonding of nickel and zirconia: Mechanical properties and interfacial microstructuresJournal of Materials Research, 1992
- Palladium-zirconia diffusion bonds: Mechanical properties and interface reactionsActa Metallurgica et Materialia, 1992
- Microstructural characteristics in Ni/zirconia bondingJournal of Materials Science, 1990
- Issues of metal-ceramic joining.Bulletin of the Japan Institute of Metals, 1990
- Effect of applied DC voltage on the wettability of zirconia by liquid iron and strengthening of sprayed zirconia to iron.ISIJ International, 1990
- Diffusional interactions and reactions between a partially stabilized zirconia thermal barrier coating and the NiCrAlY bond coatMaterials Science and Engineering: A, 1989
- Joining Between Zirconias Using Platinum Metal1989
- Elastic properties and damping capacity1976
- Surface Tension at Elevated Temperatures. II. Effect of C, N, O and S on Liquid Iron Surface Tension and Interfacial Energy with Al2O3The Journal of Physical Chemistry, 1955