Dynamic Response Analysis of Tooth Root Crack Failure in Helical Idler Gear System Under Different Working Flank Conditions
Open Access
Abstract
Helical idler gear transmission systems can adapt to high-speed, heavy-load working environments and are thus widely used in aerospace, shipbuilding, and other heavy industry sectors. Root crack is one of the common fault types. Prior studies generally only considered cracks at a single working flank, lacking comparative analysis between the crack at the working flank and the non-working flank. This paper examines the dynamic response of helical idler gears with root cracks at different working flanks, comparing dynamic response differences between working and non-working flank cracks. First, a comprehensive dynamics model of the helical idler gear system is established. Second, the influence of root crack location (the working flank or the non-working flank) on time-varying meshing stiffness is considered based on potential energy method, and a flexible model is established by finite element method for the faulty gear. Finally, solution results of the rigid-flexible coupling dynamics model are analyzed. The dynamic response signal characteristics of root cracks at the working flank and the non-working flank are analyzed in time domain, frequency domain and time frequency domain, respectively. Corresponding experiments are designed based on the FZG experimental platform, and the experimental results are in good agreement with the simulation results, which verified the accuracy of the model.Keywords
Funding Information
- NSFC (52475049)
- National Natural Science Foundation of China (52475049)
This publication has 47 references indexed in Scilit:
- Nonlinear dynamics of a spur gear pair with force-dependent mesh stiffnessNonlinear Dynamics, 2019
- Investigations into non-metallic inclusion crack area characteristics relevant for tooth root fracture damages of case carburised and shot-peened high strength gears of different sizes made of high-quality steelsForschung im Ingenieurwesen, 2019
- A new dynamic model of a cylindrical gear pair with localized spalling defectsNonlinear Dynamics, 2017
- Characteristics of transmission error and vibration of broken tooth contactJournal of Mechanical Science and Technology, 2016
- Crack behavior in a high contact ratio spur gear tooth and its effect on mesh stiffnessEngineering Failure Analysis, 2013
- Improving mesh stiffness calculation of cracked gears for the purpose of vibration-based fault analysisEngineering Failure Analysis, 2013
- Simulation of crack propagation in spur gear tooth for different gear parameter and its influence on mesh stiffnessEngineering Failure Analysis, 2013
- Failure path based modified gear mesh stiffness for spur gear pair with tooth root crackEngineering Failure Analysis, 2013
- Failure of a Diesel Engine Timing GearJournal of Failure Analysis and Prevention, 2012
- ASSESSMENT OF GEAR DAMAGE MONITORING TECHNIQUES USING VIBRATION MEASUREMENTSMechanical Systems and Signal Processing, 2001