Characterization of Highly Filled Glass Fiber/Carbon Fiber Polyurethane Composites with the Addition of Bio-Polyol Obtained through Biomass Liquefaction
Open Access
Abstract
This work aims to investigate the process of obtaining highly filled glass and carbon fiber composites. Composites were manufactured using previously obtained cellulose derived polyol, polymeric methylene diphenyl diisocyanate (pMDI). As a catalyst, dibutyltin dilaurate 95% and Dabco® 33-LV were used. It was found that the addition of carbon and glass fibers into the polymer matrix causes an increase in the mechanical properties such as impact and flexural strength, Young’s modulus, and hardness of the material. Moreover, the dynamic mechanical analysis (DMA) showed a significant increase in the material’s storage modulus and rigidity in a wide range of temperatures. The increase in glass transition of soft segments can be noticed due to the limitation of macromolecules mobility in the material. The thermogravimetric analysis showed a four step decomposition, with maximal degradation rate at TmaxII = 320–330 °C and TmaxIII = 395–405 °C, as well as a significant improvement of thermal stability. Analysis of the material structure using a scanning electron microscope showed the presence of material defects such as voids, fiber pull-outs, and agglomerates of both fibers.Keywords
Funding Information
- Narodowe Centrum Nauki (No. 2018/02/X/ST5/02784)
This publication has 30 references indexed in Scilit:
- Testing and modelling the fatigue behaviour of GFRP composites – Effect of stress level, stress concentration and frequencyEngineering Science and Technology, an International Journal, 2020
- A novel hybridised composite sandwich core with Glass, Kevlar and Zylon fibres – Investigation under low-velocity impactInternational Journal of Impact Engineering, 2020
- Polyurethane foams from liquefied orange peel wastesFood and Bioproducts Processing, 2019
- Accelerated aging of a glass fiber/polyurethane composite for automotive applicationsPolymer Testing, 2019
- Replacement of petroleum-derived diols by sustainable biopolyols in one component polyurethane foamsJournal of Cleaner Production, 2019
- Enhancing strength and toughness of carbon fibers reinforced rigid polyurethane composites with low fiber contentPolymer Testing, 2018
- High bio-content polyurethane (PU) foam made from bio-polyol and cellulose nanocrystals (CNCs) via microwave liquefactionMaterials & Design, 2018
- Effects of accelerated environmental aging on glass fiber reinforced thermoset polyurethane compositesComposites Part B: Engineering, 2016
- Sonication as a foremost tool to improve cork liquefactionIndustrial Crops and Products, 2015
- Two-step sequential liquefaction of lignocellulosic biomass by crude glycerol for the production of polyols and polyurethane foamsBioresource Technology, 2014