Strain-induced vibration and temperature sensing BOTDA system combined frequency sweeping and slope-assisted techniques
Open Access
- 10 June 2016
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 24 (12) , 13610-13620
Abstract
A BOTDA sensing scheme combined frequency sweeping and slope-assisted techniques is proposed and experimentally demonstrated for simultaneously temperature and strain-induced vibration sensing. In this scheme, during sweeping Brillouin gain spectrum (BGS) for temperature measurement, we simultaneously perform FFT to the time-domain traces whose probe-pump frequency difference (PPFD) is within the FWHM of the BGS at each position of fiber, and the location and the frequency of the strain-induced vibration event can be acquired based on SA-BOTDA technique. In this way, the vibration can be continuously measured at each selected working frequency point during the BGS scanning process and multiple measurements of vibration event can be completed in one whole BGS scanning process. Meanwhile, double sidebands probe method is employed to reduce the nonlocal effects. In our experiment, a temperature event and two vibration events with the frequency of 7.00Hz or 10.00Hz are simultaneously measured near the end of 10.6km long sensing fiber in a traditional BOTDA system. The system shows 1.2°C temperature accuracy and 0.67Hz frequency resolution, as well as a 3m spatial resolution. The proposed method may find some potential applications where both the strain-induced vibration frequency and temperature are the diagnostic objects.Keywords
Funding Information
- National Natural Science Foundation of China (NSFC) (61307096, 61405090, 61540017, 61565002)
- Natural Science Foundation of Guangxi Province (2014GXNSFBA118282)
- the key project of Guangxi province Higher Educational Science and Technology (ZD20140213)
This publication has 19 references indexed in Scilit:
- Dynamic BOTDA measurements based on Brillouin phase-shift and RF demodulationOptics Express, 2012
- Recent Progress in Distributed Fiber Optic SensorsSensors, 2012
- Raman-assisted Brillouin optical time-domain analysis with sub-meter resolution over 100 kmOptics Express, 2012
- Sweep-free distributed Brillouin time-domain analyzer (SF-BOTDA)Optics Express, 2011
- Truly Distributed Fiber Vibration Sensor Using Pulse Base BOTDA With Wide Dynamic RangeIEEE Photonics Technology Letters, 2011
- High-repetition-rate distributed Brillouin sensor based on optical correlation-domain analysis with differential frequency modulationOptics Letters, 2011
- SBS-Based Fiber Optical Sensing Using Frequency-Domain Simultaneous Tone InterrogationJournal of Lightwave Technology, 2011
- Dynamic strain measurement in optical fibers by stimulated Brillouin scatteringOptics Letters, 2009
- Distributed Fiber Strain Sensor With 1-kHz Sampling Rate Based on Brillouin Optical Correlation Domain AnalysisIEEE Photonics Technology Letters, 2007
- 32-km distributed temperature sensor based on Brillouin loss in an optical fiberOptics Letters, 1993