Influence of Hole Geometry on Performance of a Rotational Hydrodynamic Cavitation Reactor
Open Access
- 9 May 2022
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 10
Abstract
Cavitation is a common phenomenon in hydraulic power industry, ship propulsion, pump station and other industrial fields. In the present work, a high-speed camera is used to visualize the flow field in a rotational hydrodynamic cavitation reactor (RHCR) in a closed cycle test rig, and the numerical simulation is carried out based on the RNG k-ε turbulence model and the Zwart-Gerber-Belamri (ZGB) cavitation model. Influence of hole diameter, hole height and hole cone bottom length on performance of RHCR are comprehensively investigated. The results show that the numerical results are in good agreement with the experimental data, which verifies the accuracy and reliability of the numerical method. The hole diameter mainly influences the water vapor exchange boundary, the hole height mainly influences the cavitation area and intensity, and the cone bottom length mainly influences the vortex number and intensity. Under different hole diameters, the dominant frequent of pressure fluctuation in hole is 24 fi corresponding to the hole number along the circumferential direction, and the maximum amplitude appears near the hole top due to the small gap between the hole top and the side wall of the rotor. When the hole diameter increases from 11 to 17 mm, the pressure fluctuation amplitude increases by 1.65 times for each increase of 2 mm.Keywords
Funding Information
- National Natural Science Foundation of China (51879140)
- State Key Laboratory of Hydroscience and Engineering (2021-KY-04)
This publication has 42 references indexed in Scilit:
- Rotation generator of hydrodynamic cavitation for water treatmentSeparation and Purification Technology, 2013
- Hydrodynamic cavitation as a novel approach for wastewater treatment in wood finishing industrySeparation and Purification Technology, 2013
- Pressure Fluctuation Prediction of a Model Kaplan Turbine by Unsteady Turbulent Flow SimulationJournal of Fluids Engineering, 2009
- Hydrodynamic Cavitation: Characterization of a Novel Design with Energy Considerations for the Inactivation of Saccharomyces cerevisiae in Apple JuiceJournal of Food Science, 2008
- Application of cavitational reactors for water disinfection: Current status and path forwardJournal of Environmental Management, 2007
- Estimation of ultrasound induced cavitation bubble temperatures in aqueous solutionsUltrasonics Sonochemistry, 2005
- Temperature of Multibubble Sonoluminescence in WaterThe Journal of Physical Chemistry A, 1999
- Hot Spot Conditions during Cavitation in WaterJournal of the American Chemical Society, 1999
- The Temperature of CavitationScience, 1991
- Sonolysis of hydrocarbons in aqueous solutionInternational Journal of Radiation Applications and Instrumentation. Part C. Radiation Physics and Chemistry, 1990