Using power state estimation to calculate hotspot temperature of distribution transformers
- 1 November 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Abstract
A significant challenge the utilities face when determining the life remaining of distribution transformer insulation is that they often do not record the required load or temperature data. This is detrimental because insulation life remaining algorithms cannot therefore be applied. In power flow studies the state estimation methods are being applied to determine the flow of power around a network. In this article a study is presented where state estimation techniques were applied to a network to estimate the load of one distribution transformer on the network. Consequently, the insulation temperature and life remaining could be estimated. The results were very promising and further measurements are planned to verify the practically of this method.Keywords
This publication has 10 references indexed in Scilit:
- Ageing rate of paper insulation used in power transformers Part 2: Oil/paper system with medium and high oxygen concentrationIEEE Transactions on Dielectrics and Electrical Insulation, 2012
- Ageing rate of paper insulation used in power transformers Part 1: Oil/paper system with low oxygen concentrationIEEE Transactions on Dielectrics and Electrical Insulation, 2012
- A Cartesian Coordinate Algorithm for Power System State EstimationIEEE Transactions on Power Apparatus and Systems, 1983
- Static state estimation in electric power systemsProceedings of the IEEE, 1974
- State Estimation in Power Systems Part I: Theory and FeasibilityIEEE Transactions on Power Apparatus and Systems, 1970
- State Estimation in Power Systems Part II: Implementation and ApplicationsIEEE Transactions on Power Apparatus and Systems, 1970
- Power System State EstimationIEEE Transactions on Power Apparatus and Systems, 1970
- Power System Static-State Estimation, Part III: ImplementationIEEE Transactions on Power Apparatus and Systems, 1970
- Power System Static-State Estimation, Part I: Exact ModelIEEE Transactions on Power Apparatus and Systems, 1970
- Power System Static-State Estimation, Part II: Approximate ModelIEEE Transactions on Power Apparatus and Systems, 1970