Type-C Simulations of Centrifuge Tests from LEAP-ASIA-2019 Using SANISAND-Sf
Authors:
Open Access
- 24 February 2024
- book chapter
- Published by Springer Nature
- p. 315-334
Abstract
This chapter presents Type-C numerical simulations of prototype-scale centrifuge tests on gently sloped liquefiable deposits of Ottawa F65 sand for the LEAP-ASIA-2019 project. The simulations aim to assess the performance of the numerical modeling approach and a SANISAND-type constitutive model for large post-liquefaction shear deformation of sands. The constitutive model is calibrated against cyclic torsional shear tests conducted at different relative density levels and cyclic shear stress amplitudes. The laboratory-determined hydraulic conductivity of sand is doubled and kept constant during the dynamic stage of the analyses to account for the increase in permeability experienced during liquefaction. The simulations successfully capture the acceleration response and excess pore water pressure generation and dissipation of the slope deposit when soil liquefaction is observed. However, accurately modeling lateral displacements remains challenging in most cases. The results provide insights into the capabilities and limitations of the adopted Type-C numerical simulations, numerical modeling approach, and constitutive model.Keywords
This publication has 24 references indexed in Scilit:
- LEAP-GWU-2015 experiment specifications, results, and comparisonsSoil Dynamics and Earthquake Engineering, 2018
- SANISAND-Z: zero elastic range sand plasticity modelGéotechnique, 2016
- Evaluation of variation of permeability in liquefiable soil under earthquake loadingComputers and Geotechnics, 2012
- SANISAND: Simple anisotropic sand plasticity modelInternational Journal for Numerical and Analytical Methods in Geomechanics, 2007
- Study of pore pressure variation during liquefaction using two constitutive models for sandSoil Dynamics and Earthquake Engineering, 2007
- Generalised scaling relations for dynamic centrifuge testsGéotechnique, 2005
- Simple Plasticity Sand Model Accounting for Fabric Change EffectsJournal of Engineering Mechanics, 2004
- A critical state two-surface plasticity model for sandsGéotechnique, 1997
- Fundamentals of Poroelasticity1993
- General Theory of Three-Dimensional ConsolidationJournal of Applied Physics, 1941