ASP Chemical Flooding Without the Need for Soft Water
Authors:
- 21 September 2008
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Alkaline-surfactant-polymer (ASP) flooding using conventional alkali requires soft water. However, soft water is not always available, and softening hard brines may be very costly or infeasible in many cases depending on the location, the brine composition and other factors. For instance, conventional ASP uses sodium carbonate to reduce the adsorption of the surfactant and generate soap in-situ by reacting with acidic crude oils; however, calcium carbonate precipitates unless the brine is soft. A form of borax known as metaborate has been found to sequester divalent cations such as Ca++ and prevent precipitation. This approach has been combined with the screening and selection of surfactant formulations that will perform well with brines with high salinity and hardness. We demonstrate this approach in this paper by combining high performance, low cost surfactants with co-surfactants that increase salinity and hardness tolerance with metaborate. Chemical formulations containing surfactants and alkali in hard brine were screened for performance and tolerance using microemulsion phase behavior experiments and crude at reservoir temperature. A formulation was found that with an optimum salinity of 120,000 ppm TDS (with 6600 ppm divalent cations) that performed well in core floods with high oil recovery and almost zero final chemical flood residual oil saturation. Additionally, chemical formulations containing sodium metaborate and hard brine gave nearly 100% oil recovery, with no indication of precipitate formation. Metaborate chemistry was incorporated into the mechanistic UTCHEM simulator and the simulator was then used to model the core floods. Overall, novel ASP with metaborate performed comparable to conventional ASP using sodium carbonate in soft water, demonstrating advancements in ASP adaptation to hard, saline reservoirs without the need for soft brine, which increases the number of oil reservoirs that are candidates for enhanced oil recovery using ASP flooding.Keywords
This publication has 22 references indexed in Scilit:
- A compositional simulator for modeling surfactant enhanced aquifer remediation, 1 formulationJournal of Contaminant Hydrology, 1996
- Partitioning Tracer Test for Detection, Estimation, and Remediation Performance Assessment of Subsurface Nonaqueous Phase LiquidsWater Resources Research, 1995
- Optimum Microemulsions Formulated with Propoxylated Guerbet Alcohol and Propoxylated Tridecyl Alcohol Sodium SulfatesJournal of Dispersion Science and Technology, 1995
- Comparison of the three-phase oil relative permeability modelsTransport in Porous Media, 1989
- Two- and Three-Phase Relative Permeabilities of Micellar FluidsSPE Formation Evaluation, 1987
- The Effect of Several Polymers on the Phase Behavior of Micellar FluidsSociety of Petroleum Engineers Journal, 1982
- Ion Exchange With Clays in the Presence of SurfactantSociety of Petroleum Engineers Journal, 1982
- A Sensitivity Study of Micellar/Polymer FloodingSociety of Petroleum Engineers Journal, 1979
- Phase Relationships in Chemical FloodingSociety of Petroleum Engineers Journal, 1978
- Multiphase Microemulsion SystemsSociety of Petroleum Engineers Journal, 1976