Development of magnetorheological finishing process for external cylindrical surfaces
- 17 August 2016
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 32 (5) , 581-588
Abstract
The recent increase in demand for functional and technological requirements of the component results in the development of complex geometrical shapes and that too with close tolerances and fine surface quality. To fulfill the needs for finishing the external cylindrical surfaces such as groove, taper, step surfaces, and threads, an advanced finishing process based on magnetorheological (MR) fluid has been developed. The developed process can finish the external cylindrical surfaces with controlled magnetic field as likely similar to turning operation. Fine finishing of external cylindrical surfaces is a significant requirement in many functional applications. The wide applications of this present process can be valuable in automotive, machine tool production, valves manufacturing, and aerospace. A modified new MR finishing tool with flat and curved tip surface has been made to perform finishing on external cylindrical surfaces. The present cylindrical finished workpiece is useful in macaroni manufacturing machine. The surface roughness values Ra, Rq, and Rz are reduced to 54.41%, 51.65%, and 40% with flat tool tip surface and 80.88%, 81.32%, and 82.5% with curved tool tip surface in 90 min of finishing time. The overall results reported that the present process with curved tool tip surface is comparatively more useful in finishing the external cylindrical surfaces.Keywords
This publication has 23 references indexed in Scilit:
- Nanofinishing of a typical 3D ferromagnetic workpiece using ball end magnetorheological finishing processInternational Journal of Machine Tools and Manufacture, 2012
- Nanofinishing of Fused Silica Glass Using Ball-End Magnetorheological Finishing ToolMaterials and Manufacturing Processes, 2012
- Rheological Characterization of Magnetorheological Finishing FluidMaterials and Manufacturing Processes, 2009
- ABRASIVE-BASED NANO-FINISHING TECHNIQUES: AN OVERVIEWMachining Science and Technology, 2008
- Recent Advances in Polishing of Advanced MaterialsMaterials and Manufacturing Processes, 2008
- Magnetorheological (MR) Jet Finishing TechnologyJournal of Intelligent Material Systems and Structures, 2007
- Design and development of the magnetorheological abrasive flow finishing (MRAFF) processInternational Journal of Machine Tools and Manufacture, 2004
- A fundamental study on the mechanism of electrolytic in-process dressing (ELID) grindingInternational Journal of Machine Tools and Manufacture, 2002
- MAGNETORHEOLOGICAL FINISHINGInternational Journal of Modern Physics B, 1996
- Machining time estimation for magnetic abrasive processesInternational Journal of Production Research, 1994