Impact of Cryogenic Treatment on HCF and FCP Performance of β-Solution Treated Ti-6Al-4V ELI Biomaterial
Open Access
Abstract
The poor fatigue strength of Ti-6Al-4V ELI is a main cause of failure in structural implants. In this work, Ti-6Al-4V ELI was subjected to β-solution treatment to obtain martensite microstructure and further subjected to −196 °C for 24 h. Significant improvement in high cycle fatigue performance of martensite Ti-6Al-4V ELI was observed on exposure to cryogenic cycle. Resistance to fatigue crack growth of alloy was augmented in martensite structure as compared with mill annealed sample and the same was retained even after exposure to cryogenic treatment. The variation observed in fatigue behavior due to cryogenic treatment was correlated with fractography and metallurgical investigations. Improvement in high cycle fatigue performance can be attributed to a combined effect of a decrease in the size of prior β grain, formation of massive α patch and its subsequent transformation into ultra-fine α and β during the soaking period at −196 °C.Keywords
This publication has 37 references indexed in Scilit:
- Fatigue behavior of Ti-6Al-4V ELI including mean stress effectsInternational Journal of Fatigue, 2017
- Failure analysis and mechanical testing of Ti–6Al–4V modular revision hip stemsCanadian Metallurgical Quarterly, 2016
- Microstructure evolution and grain refinement of Ti-6Al-4V alloy by laser shock processingApplied Surface Science, 2016
- Metallic implant biomaterialsMaterials Science and Engineering: R: Reports, 2015
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A reviewProgress in Materials Science, 2009
- Failure analysis of a Ti6Al4V cementless HIP prosthesisEngineering Failure Analysis, 2007
- Projections of Primary and Revision Hip and Knee Arthroplasty in the United States from 2005 to 2030Journal of Bone and Joint Surgery, 2007
- Titanium alloys for biomedical applicationsMaterials Science and Engineering: C, 2006
- Failure analysis of two Ti‐alloy total hip arthroplasty femoral stems fractured in vivoJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2003
- Fatigue of biomaterials: a reviewInternational Journal of Fatigue, 2000