Cracking Resistance of Steam-Cured Precast Concrete with Modified Fly Ash Cement
Preprint
- 21 September 2023
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Fly ash cement has rarely been used in Japan, mainly because its strength development is slower than ordinary Portland cement. In this research, the effect of the new fly ash cement with both high alite (C3S) cement and fly ash modified by electrostatic belt separation method on cracking resistance of precast concrete prepared by steam curing was studied. The mechanical and shrinkage properties of the proposed fly ash concrete were compared with those of concrete made using OPC cement without fly ash. In order to study the cracking tendency of precast concrete with the proposed fly ash cement, thermal stress analysis was conducted taking into consideration of the experimental data of concrete properties with the different concrete mix proportions. A standard precast concrete box culvert model was used in this 3D FEM analysis and the distribution of temperature and relative humidity in cross section and induced restraint stress during and after steam curing were discussed. Steam-cured concrete with fly ash and high alite cement developed higher compressive strength on the first day of age than concrete with OPC. The proposed fly ash concrete developed high cracking resistance in the early days. On the other hand, the results showed that the drying shrinkage at later ages was the main cause of cracking.Keywords
All Related Versions
- Version 1, 2023-09-21, Preprints
- Published version: Infrastructures, 8 (10), 154.
This publication has 4 references indexed in Scilit:
- PROPERTIES OF FLY ASH TREATED BY ELECTROSTATIC BELT SEPARATION METHODCement Science and Concrete Technology, 2020
- Analysis of Cracking Risk in Early Age Mass Concrete with Different Aggregate TypesProcedia Engineering, 2017
- State-of-the-Art Report on Control of Cracking in Early Age ConcreteJournal of Advanced Concrete Technology, 2004
- Tensile and flexural strength of cement mortar subjected to non-uniform self-stressMagazine of Concrete Research, 1992