Selective hydrogenation of oleic acid to 9‐octadecen‐1‐ol: Catalyst preparation and optimum reaction conditions

Authors:

Abstract
A new catalyst, ruthenium‐tin‐alumina is found to selectively hydrogenate oleic acid to 9‐octadecen‐1‐ol (oleyl + elaidyl alcohol) at low pressure with high yield. Catalyst preparation methods, catalyst raw materials and activation conditions have a significant effect on the activity of the catalyst. The optimum atomic ratio of ruthenium to tin is about 1:2. Catalyst prepared by an improved sol‐gel method shows higher activity and selectivity than catalysts prepared by impregnation and coprecipitation methods. Chloride is found to have a negative effect on catalytic activity. The best catalyst is prepared from chloride‐free ruthenium and tin raw materials. Under the optimum reaction conditions of 250°C and 5.6 MPa, the selectivities for 9‐octadecen‐1‐ol and total alcohol (9‐octadecen‐1‐ol + stearyl alcohol) formation are 80.9% and 97%, respectively, at a conversion of 81.3%.

This publication has 12 references indexed in Scilit: