Preparation and mechanical properties of waterborne polyurethane/carbon nanotube composites
Authors:
- 20 June 2008
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 30 (5) , 649-654
Abstract
Waterborne polyurethane (WBPU) and multiwalled carbon nanotubes (CNTs) composite films with 0–4.0 wt% CNTs were prepared by ultrasonic dispersion of carboxylic acid‐functionalized CNTs in WBPU followed by emulsion casting process. The elongations at break of the WBPU/CNTs composites increase with the incorporation of CNTs. The tensile strength and crystallinity of the nanocomposite films with lower CNTs contents (<2 wt%) increase obviously; while the tensile strengths of the composites with more CNTs (≥2 wt%) decrease, in contrast to the pure PU film. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations indicated that the CNTs are uniformly dispersed in the composites incorporated with lower CNTs contents (≤1.5 wt%). However, aggregation of CNTs increased with increasing CNTs content in the WBPU/CNTs composites, causing the macrophase separation. The dispersion state of the CNTs affects the crystallinity of the PU matrix and the phase separation of the composites, which are two key factors to influence the mechanical properties of the WBPU/CNTs composites. POLYM. COMPOS., 2009. © 2008 Society of Plastics EngineersKeywords
This publication has 28 references indexed in Scilit:
- Preparation and characterization of carbon nanotube/polyetherimide nanocomposite filmsComposites Science and Technology, 2007
- Growth of Carbon Nanotubes on Clay: Unique Nanostructured Filler for High‐Performance Polymer NanocompositesAdvanced Materials, 2005
- Preparation and Mechanical Properties of Chitosan/Carbon Nanotubes CompositesBiomacromolecules, 2005
- Computational and experimental study of interfacial bonding of single-walled nanotube reinforced compositesComputational Materials Science, 2004
- On the effective elastic moduli of carbon nanotubes for nanocomposite structuresComposites Part B: Engineering, 2004
- Carbon Nanotubes Reinforced Nylon-6 Composite Prepared by Simple Melt-CompoundingMacromolecules, 2003
- Physical interactions at carbon nanotube-polymer interfacePolymer, 2003
- Super-tough carbon-nanotube fibresNature, 2003
- Carbon Nanotubes--the Route Toward ApplicationsScience, 2002
- Carbon nanotube composites for thermal managementApplied Physics Letters, 2002