Tensile Strength of Fiber-Reinforced Composites: I. Model and Effects of Local Fiber Geometry
Authors:
- 1 November 1998
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 32 (22) , 2042-2059
Abstract
Predictions of the ultimate tensile strength of 3-dimensional fiber-reinforced composites as a function of the fiber statistical strength distribution and fiber geometry (square vs. hexagonal packing) are presented for materials in which the load transfer from broken to unbroken fibers is very localized. The predictions are obtained using a previously-developed simulation model adapted here for hexagonal fiber arrays. The model includes (1) the Hedgepeth and Van Dyke load transfer model to determine in-plane load transfer and (2) fiber slip in the longitudinal direction via a shear-lag model. Results show that, although the load transfer does depend on fiber geometry, the average composite tensile strength and the statistical distribution of strengths do not depend strongly on the fiber geometry. The size scaling of strength is then also shown to be nearly-independent of local fiber geometry. These results are physically reasonable since the critical clusters of fiber damage causing failure are observed to be larger than 15-20 fibers, so that the detailed local geometry at smaller length scales is not crucial to failure. Hence, analytic models developed previously for square fiber arrangements can be used with reasonable accuracy independent of fiber arrangements. Applications of the model to polymer matrix composites are discussed in a companion paper (Part II).Keywords
This publication has 23 references indexed in Scilit:
- Stress concentrations around multiple fiber breaks in an elastic matrix with local yielding or debonding using quadratic influence superpositionJournal of the Mechanics and Physics of Solids, 1996
- Explicit crack problem solutions of unidirectional composites - Elastic stress concentrationsAIAA Journal, 1990
- Probabilistic aspects of strength of unidirectional fibre-reinforced composites with matrix failureJournal of Materials Science, 1984
- Probability distributions for the strength of composite materials IV: Localized load-sharing with taperingInternational Journal of Fracture, 1983
- Probability distributions for the strength of composite materials II: A convergent sequence of tight boundsInternational Journal of Fracture, 1981
- A statistical theory of material strength with application to composite materialsJournal of the Mechanics and Physics of Solids, 1970
- Local Stress Concentrations in Imperfect Filamentary Composite MaterialsJournal of Composite Materials, 1967
- Tensile failure of fibrous compositesAIAA Journal, 1964
- Comparison of the statistics of two fracture modesJournal of the Mechanics and Physics of Solids, 1962
- On the strength of classical fibres and fibre bundlesJournal of the Mechanics and Physics of Solids, 1958