Shortening Stabilization Time Using Pressurized Air Flow in Manufacturing Mesophase Pitch-Based Carbon Fiber
Open Access
Abstract
Oxidation–stabilization using pressurized air flows of 0.5 and 1.0 MPa could successfully shorten the total stabilization time to less than 60 min for manufacturing mesophase pitch-based carbon fibers without deteriorating mechanical performance. Notably, the carbonized fiber heat-treated at 1000 °C for 30 min, which was oxidative–stabilized at 260 °C without soaking time with a heating rate of 2.0 °C/min using 100 mL/min of pressurized air flow of 0.5 MPa (total stabilization time: 55 min), showed excellent tensile strength and Young′s modulus of 3.4 and 177 GPa, respectively, which were higher than those of carbonized fiber oxidation–stabilized at 270 °C without soaking time with a heating rate of 0.5 °C/min using 100 mL/min of atmospheric air flow (total stabilization time: 300 min). Activation energies for oxidation reactions in stabilization using pressurized air flows were much lower than those of oxidation reactions using atmospheric air flow because of the higher oxidation diffusion from the outer surface into the center part of pitch fibers for the use of the pressurized air flows of 0.5 and 1.0 MPa than the atmospheric one. The higher oxygen diffusivities resulted in a more homogeneous distribution of oxygen weight uptake across the transverse section of mesophase pitch fibers, and allowed the improvement of the mechanical properties.Keywords
Funding Information
- Ministry of Trade, Industry and Energy (10082582)
This publication has 38 references indexed in Scilit:
- Cellulose nanocrystals reinforced κ-carrageenan based UV resistant transparent bionanocomposite films for sustainable packaging applicationsCarbohydrate Polymers, 2019
- Pitch-based carbon fibers from coal tar or petroleum residue under the same processing conditionCarbon Letters, 2016
- Pitch based carbon fibers for automotive body and electrodesCarbon Letters, 2014
- Carbon Fibers: Precursor Systems, Processing, Structure, and PropertiesAngewandte Chemie International Edition, 2014
- Recent advances in low‐cost carbon fiber manufacture from ligninJournal of Applied Polymer Science, 2013
- Fabrication and Properties of Carbon FibersMaterials, 2009
- Lignin-based carbon fibers: Oxidative thermostabilization of kraft ligninCarbon, 2005
- Lignin-based carbon fibers for composite fiber applicationsCarbon, 2002
- Review Carbon fibers for compositesJournal of Materials Science, 2000
- Preparation of general purpose carbon fibers from coal tar pitches with low softening pointCarbon, 1997