Heating reduction with shock control for a V-shaped blunt leading edge
Open Access
- 26 December 2024
- journal article
- research article
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1002, A15
Abstract
This study investigates the heating issue associated with a V-shaped blunt leading edge (VBLE) in a hypersonic flow. The heat flux generation on the VBLE is highly correlated with the shock interaction configurations in the crotch region, determined by the relative position of the triple point T and the curved shock (CS). The primary Mach reflection (MR), accompanied by a series of secondary shock–shock interactions and shock wave–boundary layer interactions, can produce extremely high heating peaks on the crotch. To configure the shock wave structures and reduce the heat flux, a shock-controllable design approach is developed based on the simplified continuity method. The strategy involves the inverse design of the crotch sweep path, according to the location of the triple point and the contour of the CS. The comparisons between the pre-designed shock configurations and the numerical results demonstrate the reliability of the design approach across various free stream Mach numbers ranging from 6 to 10. A VBLE model designed with the shock configuration of regular reflection from the same family (sRR) at a free stream Mach number of 8 is examined. Under the design conditions, the outermost heat flux peak is reduced by 80 % compared with the baseline case. The heating reduction capabilities of the model under varying free stream Mach numbers and sideslip angles are also evaluated, confirming its robustness under undesigned operating scenarios.Keywords
Funding Information
- National Natural Science Foundation of China (12302389)
- National Natural Science Foundation of China (12372295)
- National Natural Science Foundation of China (123B2037)
- National Natural Science Foundation of China (U20A2069)
This publication has 45 references indexed in Scilit:
- Mach reflection and pressure/heating loads on V-shaped blunt leading edges with variable cross-sections and crotchesChinese Journal of Aeronautics, 2024
- Investigation of the heat flux reduction scheme on a V-shaped blunt leading edge based on secondary recirculation jetsActa Astronautica, 2023
- Opposing jets for heat flux reduction and uncertainty analysis on a V-shaped blunt leading edgeAerospace Science and Technology, 2023
- Method of curved-shock characteristics with application to inverse design of supersonic flowfieldsJournal of Fluid Mechanics, 2021
- Transitions of shock interactions on V-shaped blunt leading edgesJournal of Fluid Mechanics, 2021
- Experimental study of the mean structure and quasi-conical scaling of a swept-compression-ramp interaction at Mach 2Journal of Fluid Mechanics, 2018
- Effect of the injector configuration for opposing jet on the drag and heat reductionAerospace Science and Technology, 2016
- Interaction of single-pulse laser energy with bow shock in hypersonic flowChinese Journal of Aeronautics, 2014
- Aerothermodynamics of generic re-entry vehicle with a series of aerospikes at noseActa Astronautica, 2014
- Type III and type IV shock/shock interferences: theoretical and experimental aspectsAerospace Science and Technology, 2003