Liquation Cracking in Heat Affected Zone in Ni Superalloy Welds
Author:
- 15 May 2007
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 546-549, 1163-1170
Abstract
Precipitation hardened nickel-based superalloys are widely used in aero and industrial gas turbine engines due to their excellent high temperature strength and remarkable hot corrosion resistance. A drawback of many of these alloys is that they are very difficult to weld due to their high susceptibility to heat affected zone (HAZ) cracking, both during welding and post weld heat treatments (PWHT). Weld cracking in many of these alloys has been attributed mostly to constitutional liquatioin of grain boundary NbC precipitates. however, HAZ cracking has been observed in carbon-free superalloys as well, Therefore, research was initiated to examine grain boundary liquation and cracking in HAZs in a variety of Ni-based superalloys. It was found that intergranular cracking of grain boundaries involved liquation of several other phases, in addition to NbC, that were present in pre-weld microstructure of the alloy. These even included the primary strengthening phase,γ’, in a very widely used superalloy, Inconel 738. In addition, segregation of melting point depressant element B was also observed at gain boundaries in other superalloys, which also caused grain boundaries in HAZ to liquate and resulting in their cracking. An overview of microstructural aspects of different liquation phenomena involved and characteristics of the liquid film contributing to the HAZ microfissuring of nickel superalloys will be discussed in this presentationKeywords
This publication has 12 references indexed in Scilit:
- Liquation of various phases in HAZ during welding of cast Inconel* 738LCMaterials Science and Technology, 2004
- Contribution of constitutional liquation of gamma prime precipitate to weld HAZ cracking of cast Inconel 738 superalloyScripta Materialia, 2004
- Continuousγ′precipitation in directionally solidified IN738 LC alloyMaterials Science and Technology, 1999
- The effect of grain boundary segregation of boron in cast alloy 718 on HAZ microfissuring—A SIMS analysisActa Materialia, 1997
- Effect of homogenization heat treatment on the microstructure and heat- affected zone microfissuring in welded cast alloy 718Metallurgical and Materials Transactions A, 1996
- The effect of weld Heat-Affected zone (HAZ) liquation kinetics on the hot cracking susceptibility of alloy 718Metallurgical Transactions A, 1993
- Microstructural characterization of INCOLOY 903 weldmentsMetallurgical Transactions A, 1993
- Morphology of weld heat-affected zone liquation in cast alloy 718Metallography, 1986
- The role of alloying elements in the design of nickel-base superalloysJournal of Materials Science, 1984
- Cast microstructure of Inconel 713C and its dependence on solidification variablesMetallurgical Transactions B, 1975