Performance of Geo-Base Isolation System with Geogrid Reinforcement
- 1 July 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 19 (7)
Abstract
To mitigate earthquake-related damage to buildings, a simple alternative method to conventional base isolation techniques is to provide a geo-base isolation (GBI) system, composed of a scrap tire–sand mixture, between the base of the building foundation and the supporting soil medium. The GBI system should possess adequate dynamic stiffness and damping properties, as well as enough shear strength to resist both static and seismic loads. This study focused on the use of geogrid reinforcement to improve the bearing capacity, settlement, and rotational aspects of a shallow foundation resting on a GBI layer under static loading. Load tests were carried out on a model footing resting on GBI layer with and without geogrid reinforcement in a sand-bed tank setup. Finite-element-based numerical modeling of the footing on the GBI system with geogrid was also carried out, and the computed results were compared with those measured from the experiments. Parametric studies were carried out using the developed finite-element model to arrive at an optimum thickness of the GBI layer, number of geogrid layers, depth of placement of first geogrid, and length of geogrids. The results from the study indicate that the bearing capacity of the GBI layer can be increased up to three times by providing double-layered geogrid reinforcements with a substantial reduction in the settlement.Keywords
This publication has 69 references indexed in Scilit:
- Seismic isolation for low‐to‐medium‐rise buildings using granulated rubber–soil mixtures: numerical studyEarthquake Engineering & Structural Dynamics, 2012
- Dynamic properties of dry sand/rubber (SRM) and gravel/rubber (GRM) mixtures in a wide range of shearing strain amplitudesSoil Dynamics and Earthquake Engineering, 2012
- Multifaceted potentials of tire-derived three dimensional geosynthetics in geotechnical applications and their evaluationGeotextiles and Geomembranes, 2010
- Effect of reinforcement form on the bearing capacity of square footings on sandGeotextiles and Geomembranes, 2009
- Liquefaction resistance of sand reinforced with geosyntheticsGeosynthetics International, 2008
- Behaviour of tire shred – sand mixturesCanadian Geotechnical Journal, 2004
- Strength and deformation characteristics of shredded rubber tire – sand mixturesCanadian Geotechnical Journal, 2003
- Determining the Maximum Density of Sands by PluviationGeotechnical Testing Journal, 1999
- Study of the liquefaction resistance of a saturated sand reinforced with GeosyntheticsSoil Dynamics and Earthquake Engineering, 1997
- Engineering Properties of Tire/Soil Mixtures as a Lightweight Fill MaterialGeotechnical Testing Journal, 1996