A Basic Study of CFRP Laminates with Embedded Prestrained SMA Foils for Aircraft Structures
- 1 February 2005
- journal article
- research article
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 16 (2) , 175-185
Abstract
This paper presents some basic research results for the application of the smart materials and structural systems to aircraft structure. The authors conducted quasi-static load-unload tests and fatigue tests on several kinds of quasi-isotropic carbon fiber-reinforced plastic (CFRP) laminates with embedded prestrained shape memory alloy (SMA) foils. The damage behavior and the fatigue behavior were evaluated based on the effects of the recovery stress of SMA, and the relationship between the applied strain and the transverse crack density is discussed. It was found that the developed smart materials achieved a maximum improvement of 34% in the onset strain of the transverse cracks and a maximum improvement of 60% in the onset strain of delamination as compared with the standard CFRP laminates in the static condition. However, the fatigue properties of the smart material were not improved due to the material degradation of the 90°-ply at 80°C. The fatigue test by the multistep strain method using a structural element specimen was used to verify the results of coupon tests. The results indicate the possibility of using coupon data as a design database.Keywords
This publication has 14 references indexed in Scilit:
- Improved Surface Treatment of SMA Foils and Damage Suppression of SMA-Foil Embedded CFRP LaminatesJournal of Intelligent Material Systems and Structures, 2001
- Reduction in K1 by Shape Memory Effect in a TiNi Shape-Memory fiber-Reinforced Epoxy Matrix Composite.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 1997
- One-Dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechanical Derivation with Non-Constant Material Functions and Redefined Martensite Internal VariableJournal of Intelligent Material Systems and Structures, 1993
- One-Dimensional Thermomechanical Constitutive Relations for Shape Memory MaterialsJournal of Intelligent Material Systems and Structures, 1990
- The Strain Energy Release Rate of Composite Microcracking: A Variational ApproachJournal of Composite Materials, 1989
- Analysis of cracked laminates: a variational approachMechanics of Materials, 1985
- Experimental and Analytical Studies On the Onset of Delamination in Laminated CompositesJournal of Composite Materials, 1984
- Characterization of Delamination Onset and Growth in a Composite Laminate1982
- An Energy Release Rate Approach For Stable Crack Growth in the Free-Edge Delamination ProblemJournal of Composite Materials, 1977
- The Influence of Stacking Sequence on Laminate StrengthJournal of Composite Materials, 1971