A Comparative Study of Stress Corrosion Cracking Of Steam Generator Tube Materials in Water at 315 C
Authors:
- P. K. DePDP. K. De
- 1 June 1981
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 37 (6) , 341-349
Abstract
Stress corrosion cracking (SCC) of Type 304 and 304L stainless steels, Inconel 600, Incoley 800, and Monel 400 has been studied in water at 315 C, with or without 0.6 ppm Pb and 0.05 or 8 ppm O2. In 1600 hours test, results indicated that under mill annealed, cold worked (25%) and stress relieved (675 C, 1 hour) conditions, Type 304L, Incoley 800, and Monel 400 were resistant to cracking, whereas highly stressed Inconel 600 cracked intergranularly, irrespective fo the presence of Pb and O2 content in the water. Inconel 600, heat treated at 600 C for 24 hours or more following annealing, was found to be resistant to SCC. This beneficial heat treatment at 600 C has resulted in semi-continuous type precipitates at the grain boundaries. In addition, this heat treatment appeared to have stabilized the microstructure of Inconel 600, as seen indirectly, such as from the changes in mechanical properties, hydrogen uptake, and electrochemical behavior. The effects of these microstructural changes on the SCC behavior have been discussed.Keywords
This publication has 10 references indexed in Scilit:
- Effect of Processing Variables on the Caustic Stress Corrosion Resistance of Inconel Alloy 600Corrosion, 1980
- The Effect of Carbon Content and Thermal Treatment on the SCC Behavior of Inconel Alloy 600 Steam Generator TubingCorrosion, 1979
- The Influence of Thermal Treatment on the SCC Behavior of Inconel Alloy 600 at Controlled Potentials in 10% Caustic Soda Solutions at 315 CCorrosion, 1979
- Low Temperature Sensitization of Welded Type 304 Stainless SteelCorrosion, 1978
- Effect of Microstructure on Stress Corrosion Cracking of Alloy 600 in High Purity WaterCorrosion, 1977
- Review of the Stress Corrosion Cracking of Inconel 600Corrosion, 1975
- Influence de la contrainte, des traitements thermiques et des couplages sur la fissuration intergranulaire des alliages 1nconel 600 et X 750Journal of Nuclear Materials, 1975
- Investigation of Stress Corrosion Cracking Susceptibility of Fe-Ni-Cr Alloys in Nuclear Reactor Water EnvironmentsCorrosion, 1973
- Sensitivity to Stress Corrosion and Intergranular Attack of High-Nickel Austenitic AlloysCorrosion, 1966
- Effect of Contaminants on Resistance To Stress Corrosion Cracking Of Ni-Cr Alloy 600 in Pressurized WaterCorrosion, 1965