Resistive Chemosensors for the Detection of CO Based on Conducting Polymers and Carbon Nanocomposites: A Review
Open Access
Abstract
Nanocomposite materials have seen increased adoption in a wide range of applications, with toxic gas detection, such as carbon monoxide (CO), being of particular interest for this review. Such sensors are usually characterized by the presence of CO absorption sites in their structures, with the Langmuir reaction model offering a good description of the reaction mechanism involved in capturing the gas. Among the reviewed sensors, those that combined polymers with carbonaceous materials showed improvements in their analytical parameters such as increased sensitivities, wider dynamic ranges, and faster response times. Moreover, it was observed that the CO reaction mechanism can differ when measured in mixtures with other gases as opposed to when it is detected in isolation, which leads to lower sensitivities to the target gas. To better understand such changes, we offer a complete description of carbon nanostructure-based chemosensors for the detection of CO from the sensing mechanism of each material to the water solution strategies for the composite nanomaterials and the choice of morphology for enhancing a layers’ conductivity. Then, a series of state-of-the-art resistive chemosensors that make use of nanocomposite materials is analyzed, with performance being assessed based on their detection range and sensitivity.Keywords
This publication has 67 references indexed in Scilit:
- A disposable amperometric biosensor based on inkjet-printed Au/PEDOT-PSS nanocomposite for triglyceride determinationSensors and Actuators B: Chemical, 2013
- Metal Oxide Semi-Conductor Gas Sensors in Environmental MonitoringSensors, 2010
- CO sensor based on polypyrrole functionalized with iron porphyrinSynthetic Metals, 2009
- Conducting polypyrrole modified with ferrocene for applications in carbon monoxide sensorsSensors and Actuators B: Chemical, 2007
- Efficient Isolation and Solubilization of Pristine Single‐Walled Nanotubes in Bile Salt MicellesAdvanced Functional Materials, 2004
- Individually Suspended Single-Walled Carbon Nanotubes in Various SurfactantsNano Letters, 2003
- Investigation of electropolymerized polypyrrole composite film: Characterization and application to gas sensorsJournal of Applied Polymer Science, 2003
- The fabrication and characterisation of a highly sensitive polypyrrole sensor and its electrical responses to amines of differing basicity at high humiditiesSynthetic Metals, 2002
- Nanotube Molecular Wires as Chemical SensorsScience, 2000
- Electrical and structural analysis of conductive polyaniline/polyimide blendsJournal of Applied Polymer Science, 1999