Catalyzed Synthesis and Characterization of a Novel Lignin-Based Curing Agent for the Curing of High-Performance Epoxy Resin
Open Access
Abstract
In this study, lignin, an aromatic compound from the forestry industry, was used as a renewable material to synthesize a new aromatic amine curing agent for epoxy resin. Firstly, lignin was separated from black liquor and hydroxyl groups were converted to tosyl groups as leaving groups. Then, primary amination was conducted using an ammonia solution at high pressure and temperature, in the presence of a nano-alumina-based catalyst. The structure of the nanocatalyst was confirmed by FT-IR, ICP, SEM, and XPS analyses. According to the FT-IR spectra, a demethylation reaction, the substitution of hydroxyl groups with tosyl groups, and then an amination reaction were successfully performed on lignin, which was further confirmed by the 13C NMR and CHNS analyses. The active hydrogen equivalent of aminated lignin was determined and three samples with 9.9 wt %, 12.9 wt %, and 15.9 wt % of aminated lignin, as curing agents, were prepared for curing the diglycidyl ether of bisphenol A (DGEBA). The thermal characteristics of the curing process of these epoxy samples were determined by DSC and TGA analyses. Moreover, the mechanical performance of the cured epoxy systems, e.g., the tensile strength and Izod impact strength, were measured, showing that in the presence of 12.9 wt % aminated lignin, the mechanical properties of the aminated lignin-epoxy system exhibited the best performance, which was competitive, compared to the epoxy systems cured by commercial aromatic curing agents.Keywords
This publication has 62 references indexed in Scilit:
- A renewable bio-based epoxy resin with improved mechanical performance that can compete with DGEBARSC Advances, 2017
- Isothermal curing kinetics and mechanism of DGEBA epoxy resin with phthalide-containing aromatic diamineThermochimica Acta, 2016
- Thermal and Rheological Characteristics of Biobased Carbon Fiber Precursor Derived from Low Molecular Weight Organosolv LigninACS Sustainable Chemistry & Engineering, 2015
- Enhanced thermal stability and lifetime of epoxy nanocomposites using covalently functionalized clay: experimental and modellingNew Journal of Chemistry, 2015
- The curing kinetics and thermal properties of epoxy resins cured by aromatic diamine with hetero-cyclic side chain structureThermochimica Acta, 2014
- Preparation and characterization of toughened composites of epoxy/poly(3,4-ethylenedioxythiophene) nanotube: Thermal, mechanical and electrical propertiesComposites Part B: Engineering, 2013
- Bio-based epoxy resin from itaconic acid and its thermosets cured with anhydride and comonomersGreen Chemistry, 2012
- Cellulose-Based Bio- and Nanocomposites: A ReviewInternational Journal of Polymer Science, 2011
- Eco-Challenges of Bio-Based Polymer CompositesMaterials, 2009
- Emerging biodegradable materials: starch- and protein-based bio-nanocompositesJournal of Materials Science, 2008