Influence of preparation parameters on the CHT curing diagrams of MUF polycondensation resins
Authors:
- 19 June 2001
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 81 (11) , 2821-2825
Abstract
Lignocellulosic substrates such as wood have been found to have a marked modifying influence on both lower‐temperature and higher‐temperature zones of TTT and CHT diagrams during hardening of formaldehyde‐based polycondensates. While the modifying influence of the substrate has been described, the modifying influence of some of the most important manufacturing parameters of the resins on the CHT diagram, not having been previously investigated, are explored here and clear trends are shown. In the case of melamine–urea–formaldehyde (MUF) resins for wood adhesives, the molar ratio (M+U):F appear to be the dominant parameter influencing the relative position of gel and vitrification curves in relation to each other. The ratio of melamine to urea does not appear to have any effect on the relative position of the curve, lacking any clear trend, at least at the higher (M+U) molar ratio of 1:1.9 used for this series of resins. In the case presented for the first time, the influence of resin manufacturing parameters on CHT curing diagrams was studied in combination with the modifications introduced by the substrate. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2821–2825, 2001Keywords
This publication has 7 references indexed in Scilit:
- Lignocellulosic substrates influence on TTT and CHT curing diagrams of polycondensation resinsJournal of Applied Polymer Science, 1999
- Crosslinked and entanglement networks in thermomechanical analysis of polycondensation resinsJournal of Applied Polymer Science, 1998
- Thermomechanical analysis of entanglement networks: Correlation of some calculated and experimental parametersJournal of Applied Polymer Science, 1998
- On the correlation of some theoretical and experimental parameters in polycondensation crosslinked networks. II. Interfacial energy and adhesion on cellulose substratesJournal of Applied Polymer Science, 1997
- On the correlation of some theoretical and experimental parameters in polycondensation cross-linked networksJournal of Applied Polymer Science, 1997
- Molecular mechanics modelling of interfacial energy and flexibility on celluloseJournal of Adhesion Science and Technology, 1997
- Diffusion hindrance vs. wood‐induced catalytic activation of MUF adhesive polycondensationJournal of Applied Polymer Science, 1995