Mechanical and corrosion characteristics of micro-arc oxidized magnesium alloy (ZE41) friction stir welds in modified SBF
- 1 September 2023
- journal article
- research article
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (10) , 105901
Abstract
Magnesium is a popularly known class of biodegradable metallic biomaterials, and it has spent most of its time in corrosion environments that must be validated before it can be used in real bio applications. This work studies the adaptability of rare earth magnesium alloy (Mg-RE) ZE41 welds for in vitro bio applications. Magnesium rare earth ZE41 alloy plates were welded through a friction stir joining process. The fabrication of a defect-free and strong friction stir butt joint was confirmed by microscopic analysis and mechanical tests. The joint efficiency of 79.25% was arrived from the tensile test based on ultimate tensile strength (UTS). The microhardness at WN, HAZ and base material were measured as 82, 63, and 70 respectively. A silicate electrolyte-based micro-arc oxidation (MAO) coating process was carried out on base and weld samples to study the corrosion behaviour of uncoated and coated samples in modified simulated body fluid (m-SBF). The average coating thickness of the samples was 40 μm. Then the processed samples were immersed in the m-SBF solution for 0.25 h, 72 h, and 168 h, and the degradation behaviour of all the samples was studied. The surface morphology and compositions were analysed through x-ray diffraction and field emission scanning electron microscopy (FE-SEM) on all the MAO-coated and uncoated bases as well as weld samples. The electrochemical impedance spectroscopy (EIS) and potentiodynamic polarisation (PDP) tests were employed to evaluate the electro-chemical induced corrosion behaviour of the samples. The results revealed that MAO-coated ZE41 welded samples have better corrosion mitigation properties with a corrosion rate of 12.45 mpy after 168 h of immersion than all other counterparts due to the compact oxide layer formation and further apatite mineral phase deposition that helps to delay the surface degradation of friction stir welded ZE41.Keywords
This publication has 54 references indexed in Scilit:
- Surface Modifications of Magnesium Alloys for Biomedical ApplicationsAnnals of Biomedical Engineering, 2011
- Corrosion protection of biodegradable magnesium implants using anodizationMaterials Science and Engineering: C, 2011
- Effect of current density on corrosion resistance of micro-arc oxide coatings on magnesium alloyTransactions of Nonferrous Metals Society of China, 2010
- Biomedical Implants: Corrosion and its Prevention - A ReviewRecent Patents on Corrosion Science, 2010
- The history of biodegradable magnesium implants: A review☆Acta Biomaterialia, 2010
- Biodegradable behaviors of AZ31 magnesium alloy in simulated body fluidMaterials Science and Engineering: C, 2009
- First-principles calculations of elastic constants of DO3-Mg3RE (RE = Sc, Y, La, Ce, Lu)Physica Scripta, 2008
- Degradable biomaterials based on magnesium corrosionCurrent Opinion in Solid State and Materials Science, 2008
- A Possible Biodegradable Magnesium Implant MaterialAdvanced Engineering Materials, 2007
- Magnesium and its alloys as orthopedic biomaterials: A reviewBiomaterials, 2006