Investigation into corrosion and wear behaviors of laser-clad coatings on Ti6Al4V
Open Access
- 1 January 2020
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (1) , 016587
Abstract
TiAlCoCrxFeNihigh-entropy alloys (HEAs) coatings were fabricated on the surface of Ti6Al4V by laser cladding. Their microstructural evolution with the increase in x value (x = 0, x = 1.0, x = 2.0) was investigated in detail. Besides that, the investigation into the effects of the Cr content on their corrosion behaviors and mechanical properties (in terms of hardness and wear resistance) was also carried out comprehensively. The results indicated that two kinds of phases (a solid solution with thehexagonal close-packed (HCP) structureand Ti2Ni) were synthesized in the coatings, and the HCP content was gradually increased with the increase in x accompanied with the decrease in Ti2Ni content. A HEA coating only composed of single HCP was successfully prepared when x reached 2.0. The electrochemical and immersion tests all confirmed that the coating with x = 2.0demonstrated the most excellent corrosion resistance in a0.1 mol·L−1 HCl solution from different aspects including corrosion tendency and corrosion rate without the applied potential, the formation difficult/stability of the passive film and the dissolution rate in the passive state, and corrosion surface morphology. The averagemicrohardness values of the coatings weregraduallyincreasedfrom 656HV0.2 to 800 HV0.2with increasing xfrom 0 to 2.0, which wereabout double that of the substrate (350 HV0.2). Wear resistance of the coatings also exhibited the upward tendency with increasing the x values (0.562 mm3 at x = 2.0, 0.640 mm3 at x = 1.0, 0.641 mm3 at x = 0 and 1.419 mm3 for the substrate). More Cr addition into the cladding material will contribute to the formation of a HEA coating composed of single HCPwith excellent corrosion and wear resistance.Keywords
Funding Information
- “ShuGuang” Project of Shanghai Municipal Education Commission (12SG44)
- National Natural Science Foundation of China (51471105)
This publication has 49 references indexed in Scilit:
- Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future InterestsAdvanced Engineering Materials, 2019
- Laser-Sustained Plasma (LSP) Nitriding of Titanium: A ReviewCoatings, 2019
- Surface Modification of Biomedical Titanium Alloy: Micromorphology, Microstructure Evolution and Biomedical ApplicationsCoatings, 2019
- The corrosion protection ability of TiAlN coatings produced with CA-PVD under superimposed pulse biasSurface and Coatings Technology, 2018
- Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser claddingSurface and Coatings Technology, 2018
- Fibre laser nitriding of titanium and its alloy in open atmosphere for orthopaedic implant applications: Investigations on surface quality, microstructure and tribological propertiesSurface and Coatings Technology, 2017
- Rapid preparation of TiC reinforced Ti6Al4V based composites by carburizing method through spark plasma sintering techniqueMaterials & Design (1980-2015), 2015
- Corrosion behavior of plasma sprayed ceramic and metallic coatings on carbon steel in simulated seawaterMaterials & Design (1980-2015), 2013
- Microstructure and corrosion behavior of TiC/Ti(CN)/TiN multilayer CVD coatings on high strength steelsApplied Surface Science, 2013
- Sol-enhanced electroplating of nanostructured Ni–TiO2 composite coatings—The effects of sol concentration on the mechanical and corrosion propertiesElectrochimica Acta, 2010