Probe rotation effects on direction of arrival estimation in array‐type directional borehole radar
Authors:
- 1 March 2017
- journal article
- Published by Wiley in Near Surface Geophysics
- Vol. 15 (3) , 286-297
Abstract
This paper discusses the relationship between feeding line delay compensation and direction of arrival estimation in an array‐type directional borehole radar. In this radar, since the space available for an array antenna is limited by the borehole diameter, direction of arrival estimation is based on small travel time differences among array elements, and an accurate compensation of feeding line delays is important. Computer simulation confirmed that the radar probe rotation in a borehole leads to errors in the direction of arrival estimation of greater than 15° if the delays associated with the feeding array antenna elements are not compensated to within 0.1 ns. This may be caused by a failure to measure the time delays of electrical circuits around the feeding points of the antenna elements. In this case, we suggest that the lengths of system components other than the coaxial cables should be kept to less than 3 cm. Based on these investigations, we developed an array‐type directional borehole radar for a geotechnical project to locate foundation piles. In a field experiment, we confirmed that direction of arrival estimation errors were below about 15°, although the radar probe rotated through more than 180° during the measurement, thanks to correct compensation of the cables. With the correct compensation, we demonstrated three‐dimensional location of a buried cylindrical conducting object, which was located at 2 m from the radar in wet soil. We were able to estimate the reflection point position with an accuracy of 34 cm, which is the averaged error of the three‐dimensional location, while allowing the radar probe to rotate.Keywords
This publication has 22 references indexed in Scilit:
- Electrical resistivity imaging of unknown bridge foundationsNear Surface Geophysics, 2013
- A Fast Calculation Method for the Receiving Mutual Impedances of Uniform Circular ArraysIEEE Antennas and Wireless Propagation Letters, 2012
- Interference Criterion for Coaxial-Fed Circular Dipole Array Antenna in a BoreholeIEEE Transactions on Geoscience and Remote Sensing, 2012
- Determining Lengths of Reinforcements in Bored In Situ Concrete Piles Using the Magnetic MethodJournal of Environmental and Engineering Geophysics, 2011
- Directional borehole radar calibrationJournal of Applied Geophysics, 2009
- Experimental studies for monitoring water-level by dipole-antenna array radar fixed in the subsurfaceNear Surface Geophysics, 2005
- Directional Borehole Radar With Dipole Antenna Array Using Optical ModulatorsIEEE Transactions on Geoscience and Remote Sensing, 2004
- Ground Penetrating Radar2004
- Super-resolution of coherent targets by a directional borehole radarIEEE Transactions on Geoscience and Remote Sensing, 2000
- Dispersion and Absorption in Dielectrics I. Alternating Current CharacteristicsThe Journal of Chemical Physics, 1941