Numerical Simulation of In-mold Electromagnetic Stirring on Slide Gate Caused Bias Flow and Solidification in Slab Continuous Casting
Authors:
Open Access
- 15 June 2021
- journal article
- research article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 61 (6) , 1860-1871
Abstract
A mathematical model coupled with electromagnetic field, flow, heat transfer and solidification has been developed to simulate the bias flow caused by slide gate under different slide-gate opening rates, EMS currents and casting speeds. Through comparing the magnetic flux density and flow field with measured results, the reliability of mathematical model is proved. The symmetric index, variance of solidified shell thickness have been introduced to judge the symmetry of flow field and uniformity of solidified shell, respectively. The results show that bias flow phenomenon has happened when the slide-gate opening rate is less than 100%, the deviated direction is opposite to the opening direction of slide gate. As the slide-gate opening rate decreases, the symmetry of flow field and uniformity of solidified shell decrease. Increasing the EMS current and decreasing the casting speed, the symmetry of flow field caused by slide gate increases, but it can not eliminate completely, while the uniformity of solidified shell increases firstly and then decreases. There exists an optimal EMS to balance the symmetry of flow field and uniformity of solidified shell.Keywords
This publication has 27 references indexed in Scilit:
- Large Eddy Simulation of Transient Flow, Solidification, and Particle Transport Processes in Continuous-Casting MoldJOM, 2014
- Developing Slide-Gate Systems for Casting Small Ingots and Shaped CastingsRefractories and Industrial Ceramics, 2014
- Large Eddy Simulations of Double-Ruler Electromagnetic Field Effect on Transient Flow During Continuous CastingMetallurgical and Materials Transactions B, 2014
- Fluid Flow-Related Transport Phenomena in Steel Slab Continuous Casting Strands under Electromagnetic BrakeMetallurgical and Materials Transactions B, 2011
- Comparison of Standard k-ε Model and RSM on Three Dimensional Turbulent Flow in the SEN of Slab Continuous Caster Controlled by Slide GateISIJ International, 2011
- Influence of Casting Speed Variation during Unsteady Continuous Casting on Non-metallic Inclusions in IF Steel SlabsISIJ International, 2006
- Bubble formation during horizontal gas injection into downward-flowing liquidMetallurgical and Materials Transactions B, 2001
- Modeling of biased flow phenomena associated with the effects of static magnetic-field application and argon gas injection in slab continuous casting of steelMetallurgical and Materials Transactions B, 2001
- Mathematical Modeling of Iron and Steel Making Processes. Simulation of Sliding Nozzle Gate Movements for Steel Continuous Casting.ISIJ International, 2001
- Electromagnetic stirringPhysics of Fluids A: Fluid Dynamics, 1991