The Effect of High-Pressure Hydrostatic Extrusion on Mechanical Properties of Printed with Fused Deposition Modeling PLA and PLA-Diatomaceous Earth Composites
Open Access
Abstract
Three-dimensional printing enables rapid prototyping, customization, and on-demand production. Polylactide is a popular biopolymer filament used in 3D printing. However, due to its brittleness and low mechanical strength, it often needs to be reinforced with filler particles. Diatomaceous earth shows great potential as a filler material due to its abundant and natural occurrence, biocompatibility, and environmental friendliness, as well as its excellent mechanical properties. Cold hydrostatic extrusion was used to improve the compressive strength of 3D-printed parts. Both neat and reinforced with 10% diatomaceous earth filaments were used to 3D print cylindrical billets, followed by post-processing using hydrostatic extrusion. X-ray microtomography showed a significant reduction in total and open porosity and average pore size, from ~20 µm to less than 10 µm in the Polylactide (PLA) and Diatomaceous (DE) composite. Compression tests showed a significant improvement in the compressive strength of PLA from ~60 MPa to ~100 MPa, while PLA with DE achieved an impressive almost twofold increase to 80–120 MPa. This was attributed to a reduction in pore size, as well as pore closure, which mitigates crack initiation in semi-brittle PLA. In addition, it has been proposed that hydro extrusion-induced structural rearrangement is an important strengthening factor.Keywords
Funding Information
- Ministry of Science and Higher Education of Poland (WZ/WM-IIM/3/2023)
This publication has 34 references indexed in Scilit:
- Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineriesApplied Materials Today, 2021
- A review of factors that influence the fracture toughness of extrusion-based additively manufactured polymer and polymer compositesAdditive Manufacturing, 2021
- Novel 3D printing filament composite using diatomaceous earth and polylactic acid for materials properties and cost improvementComposites Part B: Engineering, 2019
- Characterization of the mechanical response of thermoplastic parts fabricated with 3D printingThe International Journal of Advanced Manufacturing Technology, 2019
- Diatom Silica for Biomedical Applications: Recent Progress and AdvancesAdvanced Healthcare Materials, 2018
- Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive reviewAdvanced Drug Delivery Reviews, 2016
- Improving mechanical performance of injection molded PLA by controlling crystallinityJournal of Applied Polymer Science, 2007
- An activated rate theory approach to the hydrostatic extrusion of polymersJournal of Materials Science, 1981
- The hydrostatic extrusion of polymethylmethacrylateJournal of Materials Science, 1980
- Hydrostatic extrusion of solid polymersJournal of Materials Science, 1975