Technique for Fast Detection of Short Circuit Current in PV Distributed Generator
Authors:
Open Access
- 17 August 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Power and Energy Technology Systems Journal
- Vol. 3 (4) , 155-165
Abstract
This paper proposes a new fast technique, in which the slope of a photovoltaic (PV) inverter current is utilized to predict if the current is expected to exceed its rated value due to any grid faults. Two applications of this technique are demonstrated. In jurisdictions where grid codes require distributed generators (DGs) to disconnect after a fault occurrence, such as in Ontario, Canada, this technique is utilized to rapidly disconnect the PV solar system even before the inverter short circuit current actually exceeds the rated current of the inverter, thereby obviating the problem of any adverse short circuit current contribution into the grid. However, in regions where grid codes require DGs to stay connected and provide grid support, such as low-voltage ride through, this technique can be used to rapidly and autonomously transform the PV solar farm into a dynamic reactive power compensator STATCOM (termed PV-STATCOM) for providing voltage support function. In this paper, the PV-STATCOM is used to stabilize a critical induction motor load in the vicinity of the solar farm, which would have otherwise become unstable due to the grid fault. PSCAD-based simulation studies are performed on a realistic distribution network to demonstrate the effectiveness of this technique.Keywords
Funding Information
- Ontario Centres of Excellence from Bluewater Power Distribution Corporation, Sarnia (CR-SG30-11182-11)
- Hydro One Networks Inc.
- NSERC
This publication has 27 references indexed in Scilit:
- Fault Analysis for Distribution Networks With Current-Controlled Three-Phase Inverter-Interfaced Distributed GeneratorsIEEE Transactions on Power Delivery, 2015
- Real Time Parameter Estimation for Power Quality Control and Intelligent Protection of Grid-Connected Power Electronic ConvertersIEEE Transactions on Smart Grid, 2014
- Generalised model of a photovoltaic panelIET Renewable Power Generation, 2014
- Short-Circuit Protection in a Converter-Fed Low-Voltage Distribution NetworkIEEE Transactions on Power Electronics, 2013
- Novel control of a PV solar system as STATCOM (PV-STATCOM) for preventing instability of induction motor load2012
- Optimal Design of a 3.5-kV/11-kW DC–DC Converter for Charging Capacitor Banks of Power ModulatorsIEEE Transactions on Plasma Science, 2010
- Fault contribution of grid-connected inverters2009
- Modelling of squirrel-cage induction motors for electromagnetic transient programsIET Electric Power Applications, 2009
- On the Determination of Induction Motor Parameters From Manufacturer Data for Electromagnetic Transient ProgramsIEEE Transactions on Power Systems, 2008
- A survey of faults on induction motors in offshore oil industry, petrochemical industry, gas terminals, and oil refineriesIEEE Transactions on Industry Applications, 1995