Frictional Energy Dissipation in a Rough Hertzian Contact
Authors:
- 3 March 2009
- journal article
- Published by ASME International in Journal of Tribology
- Vol. 131 (2) , 021401
Abstract
The interfacial contact pressure and shear traction distributions are found for a sphere pressed onto an elastically similar half-space whose surface is populated by a uniform array of spherical asperities, when the normal load is constant and an oscillatory shear, less than that needed to cause sliding, is imposed. Details of the load history suffered by asperities in an outer sliding annulus and an inner disk, where they experience partial slip, are found, together with the effects of the roughness on the overall tangential compliance and the frictional energy losses. It is shown that for the example combination of parameters chosen, under light shear loads, the rough contact absorbs less energy than a smooth one subject to the same loading history, but that for larger shearing forces the reverse is true.Keywords
This publication has 16 references indexed in Scilit:
- Modeling of fretting wear evolution in rough circular contacts in partial slipInternational Journal of Mechanical Sciences, 2007
- Contact of single asperities with varying adhesion: Comparing continuum mechanics to atomistic simulationsPhysical Review E, 2006
- Analysis of plane and rough contacts, subject to a shearing forceInternational Journal of Mechanical Sciences, 1999
- A New Principle in Contact MechanicsJournal of Tribology, 1998
- The generalized Cattaneo partial slip plane contact problem. I—TheoryInternational Journal of Solids and Structures, 1998
- The generalized Cattaneo partial slip plane contact problem. II—ExamplesInternational Journal of Solids and Structures, 1998
- Static Axisymmetric Hertzian Contacts Subject to Shearing ForcesJournal of Applied Mechanics, 1994
- Bodies in Contact with Applications to Granular Media1974
- The Elastic Contact of Rough SpheresJournal of Applied Mechanics, 1967
- The role of surface asperities in transmitting tangential forces between metalsWear, 1963