A Novel 6/4 Flux-Switching Permanent Magnet Machine Designed for High-Speed Operations
Authors:
- 28 March 2016
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 52 (8) , 1-9
Abstract
The purpose of this paper is to investigate a novel flux-switching permanent magnet (FSPM) machine that is amenable for high-speed operation. The low-pole topology of high-speed machine is favorable to minimize fundamental frequency requirement. The lowest possible three-phase topology of the FSPM machine, with six stator slots and four rotor poles (6/4), has unacceptably large second-order harmonic distortion in the flux linkage and severe cogging torque in its conventional single-stator-single-rotor form. To resolve these challenges, a novel dual-stator structure is proposed that eliminates the even-order harmonics in the flux linkage. Harmonic distortion and cogging torque are notably reduced in the proposed machine. The principles of operation and design methods are described in this paper. The properties of the proposed dual-stator 6/4 FSPM machine are compared with a conventional 6/4 FSPM machine and a conventional 12/10 FSPM machine for a 5 kW, 15 000 r/min design. Comparison results gathered from 3-D finite-element analysis demonstrate that the proposed dual-stator 6/4 FSPM machine achieves significantly better flux linkage, back EMF, and cogging torque than the conventional 6/4 design and better efficiency than the conventional 12/10 FSPM machine.Keywords
Funding Information
- Division of Electrical Communications and Cyber Systems (1507609)
This publication has 28 references indexed in Scilit:
- A Novel Dual-Rotor, Axial Field, Fault-Tolerant Flux-Switching Permanent Magnet Machine With High-Torque PerformanceIEEE Transactions on Magnetics, 2015
- Analysis of flux switching permanent magnet machine design for high-speed applications2014
- Comparison of Wound-Field Switched-Flux MachinesIEEE Transactions on Industry Applications, 2014
- Design of High Performance Flux Switching PM Machines with Concentrated WindingsIEEE Transactions on Magnetics, 2013
- Design of Five-Phase Modular Flux-Switching Permanent-Magnet Machines for High Reliability ApplicationsIEEE Transactions on Magnetics, 2013
- Torque Density and Magnet Usage Efficiency Enhancement of Sandwiched Switched Flux Permanent Magnet Machines Using V-Shaped MagnetsIEEE Transactions on Magnetics, 2013
- Analytical Hybrid Model for Flux Switching Permanent Magnet MachinesIEEE Transactions on Magnetics, 2010
- Comparison of All- and Alternate-Poles-Wound Flux-Switching PM Machines Having Different Stator and Rotor Pole NumbersIEEE Transactions on Industry Applications, 2010
- Influence of the Rotor Pole Number on Optimal Parameters in Flux-Switching PM Brushless AC Machines by the Lumped-Parameter Magnetic Circuit ModelIEEE Transactions on Industry Applications, 2010
- Winding Configurations and Optimal Stator and Rotor Pole Combination of Flux-Switching PM Brushless AC MachinesIEEE Transactions on Energy Conversion, 2009